eTIGER ES-CAM4A Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

www.etiger.com

ES-CAM4A

Motorized IP Camera

Specifications

Image sensor: 1/3.2” CMOS, 2 MP

Video resolution 320x240, 640x480, 1280x720 (H.264)

Digital zoom: x2

Rotation: horizontal (-175° / +175°), vertical (0° / 110°)

Focal: 3.8mm, Aperture: F2.2

6 infrared LEDs for night vision (up to 8 m)

Vision scope: Horizontal: 57° / Vertical: 31° / Diagonal: 66°

Refresh frequency: up to 25 images/sec.

Processor: 580MHz, DRAM: 128MB, Flash: 16MB

Wi-Fi: IEEE 802.11 b/g/n

Built-in microphone and speaker

Audio compression: G.711, PCM, AAC

Dimensions: 107.9 x 107.9 x 116.8 mm

Weight: 280 g

Operating conditions: 0°C to 40°C (humidity: 20%~80%, non-condensing)

Power supply: 5V 2A, 110~240V/ DC Jack

Compatible with smartphones under iOS and Android / Tablets / PC / Mac

LED indicator

Microphone

Reset button

Speaker

Box content

ES-CAM4A x1

Mounting bracket x1

AC Adaptor x1

User Manual x1

Android and iOS apps

Before using the ES-CAM4A, download the

app

iSecurity+

on the App Store or Google

Play.

Plug the camera

Plug the AC adaptor to your ES-CAM4A, and plug the former into the mains.

Attention: never manually rotate the camera upward, downward, toward

the left or the right. This may damage the camera.

Initialization of the setup

Two minutes after having plugged the

ES-CAM4A, the camera rotates and the

LED indicator starts blinking alternately

in green and orange. This indicates that

the camera is now in Connection mode.

Connect your smartphone to the camera

iOS

Android

Go to the Wi-Fi

settings of your

smartphone,

select the network

“ES-CAM4AXXXX”

(the last 4 figures

represent the last 4

figures of the MAC

ID at the back of

your camera).

Launch the app iSecurity+

iOS

Android

Once the

connection

has been made

(after around

30 seconds),

launch

iSecurity+

iSecurity+ detects

automatically your

camera.

Select ‘

Yes

’ to start

the setup of your

camera.

Configuration of the camera

Select “

Continue

”

and follow the

instructions of the

installation assistant.

iOS

Android

Preview of the

camera

What your camera

views appears in

the interface : your

camera is connected

Select “

Connect

camera to Internet

”.

iOS

Android

Connection of the camera to the Internet

Select the Wi-Fi

network to which

your camera will be

connected (ADSL

box, router, etc...).

iOS

Android

Enter the password

of the Wi-Fi network

selected and press

“

Continue

”.

Note

It may take a few

minutes for the

camera to access the

Internet.

iOS

Android

Connection to iSecurity+

Create an iSecurity+

account by filling in

the fields.

iOS

Android

Enter your iSecurity+

username and

password to log in.

iOS

Android

Creation of the profile of your camera

Choose a name and

a description for your

camera and press

“

Continue

”.

Note

The registration of

your camera on the

iSecurity+ server

will only take a few

seconds.

iOS

Android

Finalization of the installation

You can use your

Android or iOS

smartphone / tablet

to access your

camera using an

Internet connection.

iOS

Android

To connect another smartphone, press the reset button at the back of the camera

once. The LED indicator at the front of the camera blinks in green and orange

alternately. You may now start the process again from page 4 “Connect your

smartphone to the camera”.

Remark

If you have pressed the reset button at the back of the camera in error and you do

not wish to connect another smartphone, press the reset button again.

Controls on the camera

iOS

Android

Take a picture

Record a video

Sound On / Off

Hold and talk

Take a picture

Record a video

Sound On / Off

Hold and talk

Speak / listen through the camera
To start a conversation through the camera, enable the sound by clicking on

and hold the icon while talking.

Zoom in / zoom out / rotate

You can zoom in/zoom out by pinching the screen. Click twice on the screen to

reset the zoom.

You can rotate the camera by sliding on the screen. The camera can rotate in four

directions (up, down, right, left).

LED lights indications

Front LED indicator

Green

Connected to local network

Green - Blinking

Searching Wi-Fi networks

Orange - Blinking

Not connected to any network

Green/Orange - Blinking

Ready to initiate Wi-Fi setup

Reset button (at the back)

Green

Setup

mode on

Orange

Setup mode initializing

Off

Setup mode off

Motion Detection and Notifications

When the camera is on, the iSecurity+ app informs you when the camera detects

an intrusion or a movement. iSecurity+ is available for download on Google Play

and the App Store.

By default, this feature is disabled. You can enable it in the settings of the iSecrurity+

app.

Access your camera from a computer

Follow the link below to access your camera from a computer:

https://app.isecurityplus.com/app/c/login.html

Installation

To mount the ES-CAM4A on a wall, remove the base of the camera.

Fasten the base to the wall with the screws and anchors included in the box.

Reattach the camera to the base and screw them together (see drawing below).

Reset

Press the button at the back of the camera for more than 12 seconds until the

front LED indicator blinks orange to restore factory settings.

If you notice connection issues, try restarting the ES-CAM4A by pressing the

button at the back of the camera for 5 seconds.

Warnings

ATTENTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence

of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the product.

To prevent Fire or Shock Hazards, Do Not Expose This PRODUCT to Rain or

Moisture.

Apparatus shall not be exposed to dripping or splashing and no object filled with

liquids, such as vases, shall be placed on the apparatus.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified

personnel only.

Regulatory Notices for USA

This equipment has been tested and found to comply with the limits for a digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

Safety instructions

Do not point the camera directly at the sun to prevent damaging the image sensor.

Keep the camera away from heat to avoid electric shocks.

Keep the camera away from rain or moisture.

Do not attempt to open, dismantle, repair, or service the camera. Doing so may

cause electric shocks and other hazards.

Any evidence of misuse, abuse, or tampering will void the Warranty.

To maintain compliance with FCC’s RF exposure guidelines, this equipment

should be installed and operated with minimum distance of 20 cm between the

radiator and your body. Use only the supplied antenna.

NEVER MANUALLY ROTATE THE CAMERA UPWARD, DOWNWARD, TOWARD THE

LEFT OR THE RIGHT. THIS MAY DAMAGE THE CAMERA.

Standards

This product bears the selective sorting symbol for waste electrical and electronic

equipment (WEEE). This means that this product must be handled pursuant to

European Directive 2002/96/EC in order to be recycled or dismantled to minimize

its impact on the environment.

For further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially

dangerous for the environment and human health due to the presence of

hazardous substances.

In compliance with European laws. This product is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC (R&TTE).

This product was designed and manufactured in compliance with Directive

2002/95/EC of the European Parliament and of the Council on the restriction of

use of certain hazardous substances in electrical and electronic equipment (RoHS

Directive - RoHS) and is deemed to comply with the maximum concentration

values set by the European Technical Adaptation Committee (TAC).

iSecurity+ additional features

For more information on the app and its features (subscription to cloud storage,

app settings, etc.) and to download latest updates (firmware or app), visit

iSecurity+’s website :

www.isecurityplus.com

-C

AM4A

-UM

-EN20150211-1.2-

ETIGER EUROPE

Rue de la Loi, 25, 7100 La Louvière, Belgium

service@etiger.com