Full Text Searchable PDF User Manual
1 Product
Name
1.1
The Middle install intelligent LCD Display
1.2
Model:C965
2 Suppliers
RisunMotor-Suzhou Bafang
3 Electrical
Parameters
24V/36V
/48V
battery supply
Rated operating current : 10mA
Max operating current : 30mA
Off leakage current < 1uA
Max output current to controller : 50mA
Operating temperature : -30
~
70
℃
Storage temperature : -40
~
70
℃
4 Dimensions & Material
4.1
Product shell is ABS, transparent window is made with high strength Acrylic, the
stiffness equals the tempered glass.
4.2
Dimensions : host/L90mm*W54mm*H13.3mm
5 Features
Suitable for low temperature
,
Max -30
℃.
Ergonomic external button design, easy to operate.
Speed display :
AVG SPEED, MAX SPEED, SPEED(Real-time).
Kilometer / Mile :
Can be set according to customers’ habits.
Smart battery indicator :
Provide a reliable battery indicator, it will not fluctuate
with the motor on/off.
The brightness of the backlight adjustable :
5-sections
9-level Assit :
3-level/5-level/6-level/9-level... optional
Mileage indicator :
Odometer/Trip distance/ Riding time
Error code indicator
Parameter settings :
Multiple parameter can be set through computer USB port,
including Assist level / Wheel diameter / Voltage / Speed limit
…
6 LCD
instructions
The figure of LCD display see below:
7 Functional
Description
7.1 Power On/Off
Press and hold Power button for 1 second can turn on/off the display. The Display can
Speed mode
Lamp
Battery indicator
PAS level
Mileage mode
Mileage information
Speed display
ERROR code
Brake
automatically shut down when there is no operate & ride for X minutes
(
X could be
0~9
)
.
7.2 Assist level operating
Short press UP/DOWN button can change the assist level. Top assist level is 9, 0 for
neutral. Level quantities can be adjusted according to the customer requirements.
Assist operating
7.3 Speed mode switch& Mileage mode switch
Short press POWER button can change the speed mode& the mileage mode,
Speed
->
AVG Speed
->
MAX Speed
->Trip->ODO-> Time.
Speed mode switch& Mileage mode switch
*If there is no operation for 5 seconds, display will return Speed (Real-Time) display
automatically.
7.4 Headlight/backlight On/Off
Press and hold UP button for 1 second can turn on/off the headlight/backlight.
The motor does not work when the battery voltage is low, Display still can keep the headlight on for a
while when E-bike is in riding.
Time
ODO
Trip
MAX speed
Speed
AVG speed
7.5 6km walk
Press and hold DOWN button for 1 second can get into walk mode, out of the mode
when release the button.
7.6 Data cleanup
Press and hold UP & DOWN buttons together for 1 second can reset several temporary
data, temporary data include
AVG Speed / MAX Speed / Trip / Time
.
8 Parameter
setting
Double press POWER button (press interval less than 0.3 second) can get into parameter
setting state, the parameter twinkles. Short press UP/DOWN buttons to change the
parameter value, short press POWER button can switch to the next parameter. Double
press POWER button (press interval less than 0.3 second) can quit from the parameter
setting state. The meter will automatically quit the parameter setting state when there is no
operation for 10 seconds.
The order of parameters is as follows.
8.1 Kilometer / Mile
: The location of speed displays symbol S7, press UP/DOWN
button rotate display the symbol
km/h / MPH
(
Km
/
Mile
)
8.2
.
Backlight brightness
: The location of speed displays symbol
bL1
, press
UP/DOWN button display symbol
1~5
to change the brightness of the backlight.
8.3 Auto off time
: The location of speed displays symbol
OFF
, press UP/DOWN
button to change the value from
1
to
9
, the number represent delay time (minutes)
before display shutdown automatically, default value is 5 minutes.
Backlight
Brightness
Auto off time
Wheel diameter
Voltage set
Speed limit set
Kilometer/Mile
Password
8.4 Wheel diameter
: The location of speed displays symbol
Wd
, press UP/DOWN
button rotate display the symbol
16/18/20/22/24/26/700C/28/29
, value represents the
diameter of the wheel (inch). Wrong value for wheel diameter will cause speed&mileage
abnormal.
8.5
.
Voltage set
: The location of speed displays symbol
bU0
, press UP/DOWN button
rotate display the symbol
24V/36V/UbE, UbE
means user-defined voltage setting, this
parameter can be set through computer.
8.6 Password/Speed limit set
: The location of speeds displays symbol
PSd
, require
to input passwords, press UP/DOWN buttons to change the password value (0~9),
short press POWER button to switch the password item, password is 4 digits, the
default password is "
1919
". Press POWER button when password adjustment is
completed. Display will return to the
Voltage set
item if the password is incorrect.
Correct password will enter the
Speed limit set
item.
8.7 Speed limit set
: The location of speed displays symbol
SPL
, the location of
mileage displays speed limit value, the default value is
25km/h
. Press UP/DOWN
buttons to modify the value, the value can be set from 10 to 45km/h. Press POWER
button to confirm when you finish the adjustment.
The maximum speed is restrict by the motor and controller, probably couldn’t reach the setting
value.
9 Error Code define
800S can give warning message when E-bike exist error, LCD display
icon and the
error code in speed position, error code is from 01 E~07 E, the definition see the table
below.
Error Code Error description
Handle
01E
Communication Error
Check the cable connection
02E
Controller
protection Check three-phase power line.
03E
three-phase power error
Check three-phase power line connection
04E
Battery low
Charge the battery
05E
Brake
error
Check
the brake connection.
06E
Turn error
Check turn to connect.
07E
Hall error
Check the hall connection
08-99E Reserved
Please
contact
the
manufacturer for error definitions
10 Assembly instructions
Please pay attention to the screw’s torque value, damaged caused by excessive torque
is not within the scope of the warranty.
There are 2 directions for the clamp installation, forward or backward.
Different assembly methods will need different cable length.
Clamps suit for 3 size of handlebar, 31.8mm, 25.4mm, 22.2mm, there are transfer rings for
25.4mm and 22.2mm, transfer ring must be assembled with the special directions, pay
attention to the green arrow below.
11 Warning
There is waterproof membrane inside the sound hole. Don’t insert sharp object into the hole,
it will causes waterproof failure.
Sun exposure may cause high temperature indicate, this is not display’s failure.
12 Output wire instructions
1、
Red wire : Anode(24v/36v)
2、
Blue wire : Power cord to the controller
3、
Black wire : GND
4、
Green wire : RxD (controller -> display)
5、
Yellow wire : TxD (display -> controller)
13 Assist level instructions
Assist level can be customized, the highest level is 9, common used assist level see the
table below:
3 level
5 level
9 level
0
0
No power assist
1
1
2
1
2
3
4
3
5
2
6
4
7
8
3
5
9
14 Certification
CE / IP65 (water proof) / ROHS.