Vivax OSK102 User Manual - User Manual

Full Text Searchable PDF User Manual

USER MANUAL OF SMART AC

CS374U-APP(OSK102)
16122000002774
20151116

Company will not be liable for any issues
and problems caused by Internet, Wi-Fi
Router and Smart Devices. Please contact
the original provider to get further help.

NOTE:

CONTENTS

Model

: OSK102

Standard

:IEEE 802.11b/g/n

Antenna Type

:Wxternal omnidirectional Antenna

，

Frequency

:WIFI

：

2.4G

Maximum Transmitted Power:

15dBm Max

Dimension

:55*24*8(mm)

Operation Temperature

:0 C~45 C/32 F~113 F.

Operation Humidity

:10%~85%

Power Input

:DC 5V/300mA

Applicable system :IOS, Android.

(Suggest:

IOS 7.0 or later Android 4.0 or later

)

Please check the service website for more
applicable devices.
Disclaimer:Due to the special situation existed
during App use,we explicitly claim as bellow:
Not all of the Android and IOS systems are compatible
with the APP.We will not be responsible for any issue
as a result of the incompatibility
SMART KIT wireless safety strategy.
Smart kit Only support WPA-PSK/WPA2-PSK
encryption and none encryption .
WPA-PSK/WPA2-PSK encryption is recommended.

Hereby, we declare that this AC is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC. The declaration
of conformity may be consulted with sales agent.

DECLARATION OF CONFORMITY

SPECIFICATION

PRECAUTIONS

DECLARATION OF CONFORMITY.........................1

SPECIFICATION...................................................1

PRECAUTIONS ....................................................1

TECHNICAL SOLUTION .......................................2

OPERATION INSTRUCTION .................................4

HOW TO USE APP ..............................................13

SPECIAL FUNCTIONS .......................................15

CAUTIONS

This device complies with Part 15 of the FCC Rules
and RSS 210 of Industry & Science Canada. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Only operate the device in accordance with the
instructions supplied. This device complies with FCC
and IC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the
possibility of exceeding the FCC and IC radio frequency
exposure limits, human proximity to the antenna shall
not be less than 20cm (8 inches) during normal operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.

1. W

Router Home Control Mode.

A W

router is needed at this mode. Smart phone and

connect to the

C through the W

router conditioner.

）

Smart Phone

）

mart Air conditioner

）

Router

④

TECHNICAL SOLUTION

2. How to install the smart kit

Remove the protective cap of the smart kit

Open the front panel and insert the smart kit into
the reserved port

Insert

Attach the QR code packed with SMART KIT to the
side panel of the machine, ensure it is convenience
to be scanned by the mobile phohe.

Smart Phone camera needs to be 5 million pixels or
above to make sure scan QR code well.
Due to different network situation, sometimes, request
time-out could be happened, thus, it is necessary to
do network configuration again.
Due to different network sitiuation, sometimes, control
process may return time out. If this situation occurs,
do not feel confused, the display on board and APP
may not be the same.

1).

Iphone Users:

scan QR Code or go to App Store and

search for

‘

NetHome Plus

’

app and download it.

2).

Android Phone users

:scan QR Code or go to

google play, search for

‘

NetHome Plus

’

app and

download it

1.Install App

OPERATION INSTRUCTION

Click Create Account

Enter your email
address and password,
and then click
Registration .

无S I M卡

08:42

20:14

VI50828_a

Creat Accout

Forgot password?

Chenwt1@midea.com.cn

Enter your E-mail address

Password

I have read and agree to the terms of service

65%

61%

Sign in

Registration

Sign up

2.Set Air conditioner to be AP mode

The procedure includes the following steps:
1) Disconnect the power supply of AC
2) Connect the power supply of AC, and continuously
press the digital display button or do not disturb
button seven times in 3 minutes.
3) When the AC displays AP , it means that the AC WIFI
has already entered into the WIFI Network Setting
Mode.

Kindly reminder:

When the AC WIFI entered into WIFI Network Setting
Mode, the Air-conditioning remote control can't open
the AC. It needs to wait 3-5 minutes or when the AC
finishes the WIFI Network Setting Mode, then the
Air-conditioning remote control can control AC
normally.
If there is no set operation under WIFI Network setting
mode,AC will quit this mode automatically 8 minutes
later ,and then the user can control the AC normally.

3.User Registration and Network Configuration

Please ensure your mobile device is connected to Wifi
router. Also, the Wifi router has already connected to
Internet before doing user registration and network
configuration.

Using Android device to do Network configuration

3 Press + Add Device

Scan QR Code

Select your own WiFi
network, for example
My Home (the picture
is only for reference)

Enter your own WiFi
router password and
click OK;

Configuration Success,
you can see the device
on the list.

Home

Nong Jun
User name

Add Device

无S I M卡

20:14

Align the QR code within the frame to scan

The first press of restart

61%

QR Code Pictures

My Home

Password

Cisco

Belkin

无S I M卡

20:14

Air conditioner want to use your WiFi

61%

Network OK

Home

User

Oasis

Add Device

CAUTION:

It is better to log in your email box and active your
registration account by clicking link in case you forget
the password.
It is necessary to forget any other around network and
make sure the Android or IOS device just connect to the
WIFI network you want to configure.
Make sure the Android or IOS device WIFI function
works well and can be connected back to your original
WIFI network automatically.

Using IOS device to do Network configuration

Scan QR Code

3 Press + Add Device

Home

Nong Jun
User name

Add Device

无S I M卡

20:14

Align the QR code within the frame to scan

The first press of restart

61%

QR Code Pictures

5 Read the instruction

above and press the
Home button to return
to the device interface.

Click settings to enter
the setting page,select
WLAN/WIFI.

N o S I M

20:14

61%

Settings

Airplane Mode

WLAN

Smart

Bluetooth

Off

Cellular

Off

VPN

Notifications

Control Center

Do Not Disturb

General

Type defult password:
12345678 and click
"Join "

Return to APP and
click Next

Choose net_ac_XXXX

Select your own WiFi
network, for example
My Home (the picture
is only for reference)

Enter your own WiFi
router password and
click OK;

Settings WLAN

CHOOSE A NET WORK.....

ASUS-5GX

ASUS-2.4GX

bdptest1

bdptest1-5G

HIWIFI-22EF60

Midea

midea_fc_6866

MideaACIOT

net_ac_0010

zztest

N o S I M

20:14

61%

Joining net_ac_0010 ....

N o S I M

20:14

61%

Cancel

Join

Enter Password

Password

Configuration Success,
you can see the device
on the list.

HOW TO USE APP

Please ensure both your mobile device and air
conditioner are connected to the Internet before
using app to control the air conditioner via internet,
please follow the next steps:

Type your own account
and password, Click
"Sign in "

Select the target air
conditioner to enter
into the main control
interface.

Home

User

Oasis

Add Device

无S I M卡

08:42

VI50828_a

Creat Accout

Forgot password?

Chenwt1@midea.com.cn

65%

Sign in

When finishing network configuration, APP will
display success cue words on the screen.
Due to different Internet environment, it is possible
that the device status still display

“

offline".

If this situation occurs, user should turn off the AC
power and turn on it again. After a few minutes,

it is necessary to do pull-refresh operation to make
sure the device status become "online"

NOTE:

User

Oasis

Premier

Add Device

3 Thus, user can control

air conditioners on/off
status, operation mode,
temperature, fan speed
and so on.

SPECIAL FUNCTIONS

Timer on/ Timer off

Weekly, user can make an appointment to turn on or
off AC on specific time. User also can choose
circulation to keep the AC under schedule control
every week.

NOTE:

Not all the function of the APP is available on air
conditioner. For example: ECO, Turbo, Left and Right
Swing, Up and Down swing function, please check
the user manual to find more information.

Including: Timer on, Timer off, 8 C Heat, Sleep,
Energy, Check.

NOTE:

If the air conditioner do not support the above

function, the function will be hided from the function
list.

8 C Heat

User can let the AC run under 8 C Heat by one-click.
When people go outisde, this function can protect
your furniture from frost damage.

Sleep

User can customize their own comfortable sleep
by setting target temperature.

Check

User can simply check the AC running status with
this function. When finishing this procedure, it can
display the normal items, abnormal items, and
detail information.

Testing

Normal

Abonormal

edit

young

Elder

Children

User can see the electricity curve monthly, and
find the Lowest and highest cost per month.

Energy