Full Text Searchable PDF User Manual
Air Purifier
Model MJ-AP1GL
User's Manual
I
ndex
P
age
Household Use
•
T
hank you for purchasing this product.
•
P
lease read this manual before use.
•
P
lease keep this manual in a safe place for future reference.
D
o not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities. Contact you local
government for information regarding the
collection systems available. If electrical
appliances are disposed of in landfills or
dumps, hazardous substances can leak into
the groundwater and get into the food chain,
damaging your health and well-being.
Manufacturer: TechnoPLAS(SHENZHEN)CO,.LTD
Manufacturer A Building TechnoPLAS Ind., Sheng Bao Road,Kangle community,
Address:
Nanwan Sreet,Longgang District,Shenzhen,China. 518112
P
ackage Contents
1
P
arts Names
2
S
afety Advice
3-4
W
arnings 5-7
C
autions 7
B
efore Use
8-10
H
ow to Set Up
11
S
pecifications 12
H
ow to Use/Explanation of Indicators
13-14
O
perating Modes
15-16
S
ensors 17
H
ow to Clean the Dust Sensor
18
A
ir Purifier 360° Deodorizing Dust Collector Filter 19
H
ow to Clean the Filter
20
H
ow to Reset the Filter Cleaning Sign
21
C
hanging Filters
21
C
are & Maintenance
22
F
AQs 23-25
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
Package Contents
B
ody
P
ower Cord
U
ser's Manual
(this document)
1
Package Contents
★
P
oints to follow for long term use
D
iscontinue
Use
360°
Deodorizing
Dust Collector Filter
* At time of purchase, the filter is
in a plastic bag, stored inside
the body.
F
ilter Start Date Use Label
* The label is packed with the filter.
* Write the date of first use
and stick onto the filter.
H
ave you
noticed
any of the
following?
•
T
he purifier doesn't work, even if the
power is turned on.
•
P
ower supply is interrupted when the
cord is twisted.
•
U
nusual sounds during operation.
•
W
arped or unusually hot product
housing.
•
O
ther irregularities or malfunctions.
I
n any of these
cases, immediately
discontinue use.
Unplug the power
plug from the
socket and consult
your retailer.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
F
an guard
S
ensor cover
F
ilter cover hinge
P
ower cord slot
Parts Names
2
Parts Names
F
ilter cover
O
perational Panel
·
O
perating Mode Indicator
·
F
ilter Cleaning Sign
·
C
hild Lock Button
·
J
et Cleaning Mode Button
·
C
hange Modes Button
·
P
ower Switch
W
arning/Caution label
P
roduct label
P
lug
(product end)
P
ower plug
(socket end)
B
ody
B
ack of Body
P
ower Cord
25
P.13
P.8
P.21
P.9
P.13-14
P.14
FAQs
FAQs
Solution
Problem
Page
□
I
t is powder from the active carbon inside the filter.
▶
I
t is not harmful to humans but when cleaning the
filter, please lay newspaper on the ground.
□
S
elect Manual mode and change the air volume.
Is there a change in the noise when the operating
mode changes?
▶
P
lease check "How to Use" and "Operating Modes". It is
possible there is a rotating sound when fan mode is in
operation, so please check the specified sound levels.
Please consult the store where it was purchased from.
□
W
hen nothing is pressed for more than 1 second,
the indicator light will dim.
▶
P
lease check "How to Use".
□
I
s child lock on?
▶
P
lease check "How to Use".
□
T
he deodorizer can remove smells to a certain
extent.
*
I
t is possible that not all smells can be removed
depending on the environment.
▶
R
emove the 360° Deodorizing Dust Collector Filter and dry it
out in the sun where there is good wind flow, for half a day.
□
I
t does not necessarily remove smells that are
always present (smells from pets, building
materials etc).
▶
I
f these smells are not removed completely, please use
the product as well as ventilate the room.
□
I
s the filter cover inserted correctly?
▶
P
lease check how to insert the filter cover.
□
T
he product has detected an error and has stopped
functioning.
▶
P
lease check "How to Use" and press the power
button following the steps below.
<1st step>
→
Turn the power OFF.
<2nd step>
→
Turn the power ON and operate normally.
If it still does not function even after following the 2nd
step, please consult the store where this was purchased.
□
T
urn the machine off and unplug the power cord.
▶
R
emove the filter, and then take out the foreign object.
B
lack powder
leaking from
the filter.
D
uring operation,
there is a noise
other than that of
the air blowing.
T
he indicator light
dimmed suddenly.
I
can't change
operating modes.
F
oreign object
enters the fin guard.
T
he smell won't
go away.
T
he child lock
indicator is
flashing and the
product stopped
functioning.
*
T
he fan is below the fan guard.
Do not insert your finger or small
objects into the fan guard.
*
D
o not remove the fan and
wash. Impure air flows
through the filter and
becomes clean, so it is
difficult for the fan to
become dirty.
F
an (inside the body)
A
ir Filter
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
3
FAQs
24
P.15,16
P.15,16
P.11
P.17
P.19
P.18
P.21
P.20
P.21
Solution
Problem
Page
T
he air volume
changes without
any manual
operation.
A
strong volume
of air started
blowing.
E
ven though it is
in Auto mode, it
doesn't respond
to dust or smell.
T
here is a smell
coming from the
filter.
H
ow often should
the filter be
changed?
T
he filter cleaning
sign won't turn off.
□
C
heck the current operating mode. If it is in auto
mode, it will automatically change if dust or smell
is detected.
▶
P
lease check "Operating Modes".
□
D
id you select the Jet Cleaning Mode?
This mode cleans the air on a high level in a short time.
▶
P
lease check "Operating Modes".
Please be sure a suitable operating mode is selected.
□
I
s the sensor obstructed by the wall or other objects?
▶
P
lease check "How to Set Up".
If it is obstructed, please remove the obstruction. If
there is no obstruction, please clean the sensor at the
back of the body.
□
W
hat level of sensitivity is the sensor set to?
▶
P
lease check "Changing the sensor's sensitivity". You
can choose from Mild or Sensitive.
□
I
s the filter new? There may be a faint sweet smell
from the active carbon in the filter.
▶
A
s high range active carbon is used, it may emit a
sweet smell when it is first used. Usually it will take
about 1 week for the smell to gradually lessen.
□
D
id you use the product when there were many
different smells emitted temporarily from many
people smoking, cooking BBQ etc?
▶
A
s the filter absorbs smells, it will temporarily store it
up. It will gradually reduce as the product is in
operation.
□
D
id you move it from another room?
▶
I
t is possible it smell like the room it was used in before.
The smell will gradually reduce as the product is in operation.
□
I
t is recommended the filter is changed every year.
▶
P
lease check the date when the filter was first used.
It it has been a year, please change to a new filter.
□
D
id you reset the filter change sign?
▶
P
lease reset the filter change sign.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
Safety Advice
Safety Advice
Explanation of Signs
Warning
Explanation of Symbols
T
his symbol indicates never to do this.
T
his symbol indicates you must do this.
Prohibited
Must follow
Caution
P
lease be sure to follow the Safety Advice.
P
lease read the Safety Advice carefully before usage and use correctly. This manual contains
points for caution so that the product can be used correctly in order to prevent causing
accidental injuries or harm to the user of this product and others.
I
ndicates a hazard with a medium level of risk
which, if not avoided, could result in death or
serious injury.
I
ndicates a hazard with a low level of risk which,
if not avoided, could result in minor or moderate
injury or damage to property or furniture.
FAQs
23
FAQs
Solution
Problem
Page
P.10
P.10
P.14
P.13
P.9
P.9
P.8
P.9
P.20
P.15,16
4
□
I
s the power plug plugged in correctly?
P
lease check the following that it is plugged in
correctly.
▶
C
onnection between power code slot (of the body) and
the plug (product end).
▶
C
onnection between the power plug and socket.
□
A
re the indicators on the operating panel on?
B
e sure to press the power button to operate.
▶
A
fter reading and checking the section "How to Use",
turn the ON/OFF button if necessary.
□
I
s the child lock on?
T
urn off the child lock.
□
I
s the filter cover on correctly?
C
heck how to re-attach the filter cover.
□
I
s the filter inserted correctly?
C
heck how to insert the filter.
□
I
s there are a power outage in your area?
▶
W
ait until the power supply returns.
□
I
s the power breaker on?
▶
T
urn on the breaker.
□
D
id you remove the filter from the plastic bag and
inserted it in?
▶
A
t the time of purchase, the filter is in a plastic bag.
Remove from plastic bag and use.
□
I
s the filter inserted properly?
▶
C
heck if it is inserted properly.
□
I
s the filter dirty?
The amount of dirt will affect the air volume.
▶
P
lease clean the filter. If there is no improvement, the
filter needs to be changed.
□
I
s the operating mode in Auto mode?
▶
P
lease check the "Operating Modes".
▶
P
ress the Change Modes button to check that it is
possible to change operating modes.
P
ower doesn't
turn on.
T
here is no air
blowing.
There is no
change in air
volume.
The air volume
has decreased
from when it was
first purchased.
Safety Advice
I
n order to use safely:
I
f any of the following occurs, stop usage immediately and contact the store where it was
purchased from.
S
top usage immediately if there are any
irregularities such as unusual sounds,
smell or heat.
N
ot doing so may cause malfunction or fire.
D
o not insert foreign objects or
your finger inside the guard or
moving parts.
T
his may cause injury.
D
o not use on unstable locations or
next to dangerous objects.
T
his may cause injury if it falls over.
S
top usage immediately if the fan is
rotating abnormally or if there are other
abnormalities.
N
ot doing so may cause malfunction or fire.
D
o not use near objects such as
curtains that will block the wind flow.
I
t may get caught in the curtain, or the
filter or air diffuser may become blocked
causing an accident or injury.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
5
22
Warnings
Warnings
D
o not damage the power cord or plug.
D
amaging, altering, forcefully twisting, pulling or placing heavy objects on the cord
can cause electric shock or fire due to short circuit.
D
o not use if the power plug or cord becomes damaged, hot or loosely
plugged into the socket.
T
his may cause fire, electric shock, injury or short circuit.
D
o not use on voltages over 220-240V or over the specified ratings for
the socket or wiring appliances.
U
sing on multiple sockets over the specified ratings can cause it to heat up and lead to fire.
D
o not unplug with wet hands.
W
et hands on the electric plug can cause electric shock.
I
nsert the plug fully until the base.
I
f it is not plugged in fully, electric shock or heat can cause a fire.
S
top usage immediately and unplug if there are any abnormalities or malfunction.
N
ot doing so may lead to smoke, fire or electric shock. Please consult the store where
it was purchased.
<
A
bnormalities/Malfunction>
・
M
oving the electric cord causes it to stop operating.
・
D
uring operation, there are unusually large sounds or it moves violently.
・
T
he product is unusually hot or there is a burnt smell.
U
nplug from socket if not used for long periods.
D
eterioration of insulation can cause a fire.
R
egularly clean the dust from the electric plug.
W
hen dust accumulates, it can deteriorate insulation due to moisture, causing a fire.
W
hen cleaning, inspecting or moving the product, be sure to turn off
the power and unplug.
S
udden movements can lead to electric shock or injury.
D
o not insert foreign objects such as your finger or metal objects into
the air outlet, filter or openings inside the body.
T
ouching the inside can cause electric shock or injury.
P
lease see on how to clean the inside and the filter.
Care & Maintenance
Care & Maintenance
1
2
*
B
e careful not to damage the surface.
R
emove the plug from the socket.
(
B
enzine, thinners, other solvents or polishing powder)
*
T
his can cause scratches, discoloration or cracks.
D
o not use the following to clean the product.
P.20
T
urn off the power and remove the plug from the socket. Vacuum the dust around the body of
the product with a vacuum cleaner nozzle. Gently wipe with a soft cloth.
*
B
e sure to unplug from the socket
before starting.
V
acuum the dust around the body of the product. Gently wipe
with a soft cloth.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
21
6
Warnings
D
o not disassemble, repair or alter the product.
H
eat or irregular operation may lead to electric shock or fire.
D
o not wet or run water over the product.
T
his may lead to electric shock or fire due to a short circuit.
D
o not let children use it alone or place in an area where young
children can reach.
T
his may lead to electric shock or injury. Be especially careful with babies and infants.
D
o not use chlorine or acidic detergents.
D
etergents emit poisonous gases which may be harmful to your health.
D
o not use near combustibles, lighted cigarettes or incense.
I
t may cause it to ignite and catch on fire.
D
o not operate when using pesticides that emit smoke.
C
hemical substances that have accumulated is released through the air diffuser which
may be harmful to health.
A
fter the use of pesticides, be sure to ventilate the room sufficiently before operating
the product.
V
entilate the room when using the product together with combustible appliances.
N
ot doing so may lead to carbon monoxide poisoning.
E
ven if the product is in operation, it will not remove carbon monoxide.
D
o not use in the following locations.
T
his may lead to electric shock, fire or other damages.
・
U
nstable or high places.
・
I
n the bathroom or where there is water, high temperatures or high humidity.
・
I
n the kitchen or places where there is oil.
・
P
laces where there might be leakage or use of oil or burnable gases.
・
P
laces where there are corrosive gases or dust from metallic objects.
・
P
laces where there is direct wind on plants or animals.
・
P
laces with direct heat such as a heater.
D
o not wipe with benzine or thinners or use pesticides.
T
his may cause cracks leading to injury, or short circuit causing electric shock or fire.
T
o buy a replacement filter, please go to the store where you bought the product.
(Product Name: 360° Deodorizing Dust Collector Filter Model: MJ-AP1-FL)
How to Reset the Filter Cleaning Sign/Changing Filters
How to Reset the Filter Cleaning Sign
Changing Filters
(Ideally once a year)
*
1
A
bout changing filters
W
hen to change filters
*1
When using Jet Cleaning mode once per day.
T
urn off the power and press the Jet Cleaning Mode button for more than 2 seconds until it
beeps. The filter cleaning sign will turn off and the timer will be reset.
②
C
heck that the filter
cleaning sign is off.
①
P
ress the Jet Cleaning button
for more than 2 seconds when
the power is off.
T
he time to change filters depends on how and where you use the product. You should aim to
change it every year.
I
f it is being used in areas where the air is not clean, you may need to change it earlier.
・
W
hen changing filters, lay newspaper underneath so that dust does not spread around.
・
D
ispose of the old filter according to your local area's disposal rules.
M
ain materials of the filter .....
Polypropylene non-woven fabric, polyester non-woven
fabric, rayon, active carbon, pulp etc
・
D
epending on the environment in which it is used in, the filter may start to emit a smell within
a few weeks or months, so you may need to change the filter.
・
T
he filter is a consumable item so it will incur a cost even if it is within the warranty period.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
20
7
Cautions
Warnings/Cautions
Warnings
T
his appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
D
o not sit or lean on the product.
I
t may cause the product to fall over and lead to injury. In case it falls over, unplug
from socket.
Be especially careful when using it in homes where there are young children.
D
o not turn the product on its side.
T
his may lead to injury or damage.
W
hen moving the product, turn off the power and carry it tightly.
D
ropping the product or letting it slip and fall can lead to injury.
D
o not use for special purposes such as preserving artwork or
technical documents or commercial purposes.
T
his may lead to deterioration of the quality of preservation items.
D
uring operation, do not move the product.
T
his may lead to injury or malfunction.
K
eep hair away from the fan guard.
T
his may lead to hair getting caught or malfunction.
I
f using near pets, be careful that they don't urinate on the product or
chew on the power cord.
T
his may lead to electric shock or fire.
W
hen unplugging from the socket, pull from the plug.
N
ot doing so may lead to electric shock or fire due to damage or short circuit.
D
o not obstruct the air outlet and filter with laundry, cloths or curtains.
T
his may lead to poor air circulation causing heat or fire.
How to Clean the Filter
How to Clean the Filter
1
2
R
emove the filter following the steps on P.8.
3
I
nsert the filter following the steps on P.9.
V
acuum dust inside the body and around the filter.
T
he Filter Cleaning Sign and How to Clean the Filter
F
ilter Cleaning Sign
light on
NO
I
nside
F
ilter
B
ased on the timer located inside the body, when the period of operation reaches 500 hours
(approx. 3 weeks), the orange Filter Cleaning Sign will light up. When this lights up, please
clean the area surrounding the filter in order to maintain the product's functions.
*
L
ay newspaper underneath so the dirt from the filter doesn't spread to other areas.
*
B
e careful not to damage the surface of the filter.
*
V
acuum dirt inside and gently
wipe with a soft cloth.
*
D
o not wash with water.
(This will impair the functions.)
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
19
8
Air Purifier 360° Deodorizing Dust Collector Filter
P
rotective mesh
*
F
ilter cross-section
Air Purifier 360° Deodorizing Dust Collector Filter
A
ll-in-one dust collector and deodorizing filter
N
on-woven fabric filter
+
G
ranulated active carbon
W
hen the deodorizer becomes less effective...
*
F
ilter cross-section in detail
P
rotective mesh
N
on-woven fabric filter
N
on-woven fabric filter
G
ranulated
active carbon
G
ranulated active carbon (deodorizer)
is placed in between
non-woven fabric filters
(dust collector)
and pleated into a all-in-one dust collector and deodorizing filter.
R
evive the deodorizer by drying it out in the sun where there is good wind flow, for half a day.
Do not wash with water.
*
T
he above does not guarantee that the deodorizer will return to its original new state.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
Before Use
①
Removing/Inserting the filter
O
pen the filter cover
Before Use
①
1
a
b
c
2
*
T
op of Filter
S
tick the Filter Start Date Use Label on here.
P
ress and hold down
the filter cover hinge.
P
ull the cover in the
direction of the
arrow shown.
R
emove the cover in
the direction of the
arrow shown.
T
ake the Filter and Filter Start Date Use Label out from the plastic
bag. Stick the Filter Start Date Use Label on the side as shown.
*
C
ut the plastic bag with scissors.
18
9
* side should be facing up and push the filter
all the way back.
I
nsert the filter into the body with the pull tab facing the front.
I
nsert the filter into the body.
d
e
4
3
*
I
f the filter or filter cover is not inserted correctly, the product will not function.
R
eplacing the filter cover.
P
ull tab
(Top & bottom)
F
ilter cover
▲
▲
B
ody
360°
Deodorizing
Dust Collector
Filter
I
nsert the bottom tab of
the filter cover into the
tab slot of the body.
*
M
atch the
▲
mark of the filter cover with the same
mark on the body.
P
ush the filter cover hinge down in the
direction of the arrow shown to close.
*
T
here is a top and bottom to the filter. Insert the filter with facing the top, and
push all the way in.
Before Use
①
How to Clean the Dust Sensor
How to Clean the Dust Sensor
R
emove the sensor cover.
a
b
c
d
W
hen the lens that detects dust becomes dirty with moisture, nicotine from cigarettes etc, it
reduces the level of sensitivity. Please clean it regularly as shown below, vacuum the
surrounding dust with a vacuum cleaner, remove dirt with a dry cotton bud.
*
R
ecommended cleaning every 3 months.
U
se a vacuum cleaner to remove the
surrounding dirt that is covering it.
R
e-attach the sensor cover
after cleaning.
W
ipe the top left side of the lens with a
dry cotton bud.
*
K
eep the cover in a safe
place so you don't lose it.
*
F
irmly attach all the way
until you hear it click.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
17
10
Before Use
②
Before Use
②
Connecting the power cord
C
onnect the power plug to the socket.
1
2
I
nsert the power cord into the slot of the body.
C
onnect the power cord.
I
nsert power plug into socket.
*
P
lease insert fully to the end.
*
T
he product will beep.
a
b
P
ower cord
P
ower cord
slot
U
p
D
own
P
lug
(product end)
P
ower plug
(socket end)
A
fter inserting into socket as
shown, it will be ready to use.
C
hanging the sensor's sensitivity
(Set on Mild at time of purchase)
Sensors
E
asily detectable by the dust sensor
W
hen changing to Sensitive
T
he buzzer will sound "
Beeeep, Beep
"
*
U
nplugging the product will reset the sensor to Mild
P.16
E
asily detectable by the smell sensor
W
hen changing to Mild
T
he buzzer will sound "
Beeeep, Beep Beep
"
Dust Sensor
Smell Sensor
Sensors
T
his product is equipped with a dust sensor which detects dirt in the air and a smell
sensor which detects smells in the room.
I
n Auto mode, when the sensors detect dust or smell, it will control the air volume accordingly.
*
T
he sensors only operate in Auto Mode. Please refer to
H
ouse dust (dust, corpse and faeces of ticks,
pollen, spores of mold), cigarette or incense
smoke, pet hair
C
igarette, incense, make-up, alcohol,
sprays, pets, cooking/food odours
W
hen in Auto mode, the rotation of the fan is finely controlled depending on the monitoring
status of the 2 sensors. The sensitivity level of the sensor can be chosen from the normal
setting of Mild, or a higher sensitivity level of Sensitive. When you want to change the
sensitivity level higher during Auto mode, use the Sensitive setting. To change the sensor's
sensitivity level, press the Jet Cleaning Mode button and Change Modes button at the same
time for more than 2 seconds, while the power is turned off.
*
P
lease refer to the diagram below to change the sensor's sensitivity level.
T
o change the sensor's sensitivity
Press these 2 buttons at the same time for over 2
seconds while the power is OFF.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
11
16
How to Set Up
How to Set Up
T
o utilise the functions of the product at its optimum, please set up at a suitable
distance from the wall.
*
D
o not place under a table or where the air
outlet will be blocked.
*
D
o not place next to furniture or where the
filter will be blocked.
*
D
o not place in high areas as this will
reduce the efficiency of absorbing the air
around the ground.
P
lacing in the following locations will
not enable the product to function at
its optimum.
S
et up the product in a place where there is
good air circulation in the room.
M
ore than 120cm from ceiling.
O
perating panel
facing the front.
M
ore than 30
cm
from the w
all.
M
ore than 30
cm
from the w
all.
[Ba
ck]
M
ore
tha
n 1
0cm
from
the
wa
ll.
M
ore than 120cm from ceiling.
O
perating panel
facing the front.
M
ore than 30
cm
from the w
all.
M
ore than 30
cm
from the w
all.
[Ba
ck]
M
ore
tha
n 1
0cm
from
the
wa
ll.
Operating Modes
M
anual Mode Indicator
Auto Mode
I
dling Mode during Auto Mode Operation
[
A
ir Volume 1]
[
A
ir Volume 2]
[
A
ir Volume 3]
I
dling
O
nce the air becomes clean
T
his mode automatically controls the air volume depending on the condition of the air in the
room. The 2 sensors which detects dust and smell regularly monitors the air condition .
When dirt (dust or smell) is detected, it will clean the air accordingly. When it doesn't detect
any dirt in the air, it will repeat the cycle of <Idling > Manual Mode [Air Volume 1]>.
T
he Idling mode which operates only in Auto mode stops the air purifier fan from
rotating, while keeping the upper fan rotating slowly in order to circulate air that is
required for the sensor detectors. This mode operates at the lowest energy consumption
level at approximately 4W.
Au
to M
od
e O
pe
ra
tio
n
R
eg
ul
ar
ly m
oni
to
rin
g dir
t in
th
e a
ir
D
et
ec
ts d
ir
t
S
el
ec
ts
c
le
aning
m
od
e
de
pe
nding
o
n c
le
anl
in
es
s o
f a
ir
M
anual
[
A
ir Volume 1]
M
anual
[
A
ir Volume 2]
M
anual
[
A
ir Volume 3]
I
f d
irt i
s d
ete
cte
d d
uri
ng
op
era
tio
n, t
he a
ir v
olu
me
wi
ll be
ad
jus
ted
.
P.17
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
15
12
Specifications
Specifications
*
1
For use in Hong Kong and Europe.
*
2
Suitable Floor Area and Cleaning Time is based on "JEM1467" (during Jet Cleaning Mode).
*
3
Idling mode only functions during Auto mode.
B
ody
*
1
M
odel
MJ-AP1GL
P
ower Source
AC
220-240VAC 50Hz
S
uitable Floor Area (Ideal)
~49m
2
*
2
C
leaning Time
10min/32m
3
*
2
O
perating Mode
Jet Cleaning
3
2
1 Idling*
3
T
otal Air Volume 6.7m
3
/min 3.1m
3
/min 1.9m
3
/min 1.1m
3
/min —
E
nergy Consumption 32W 10W
7W
4W 4W
O
perating Noise Level
60dB
43dB
34dB
27dB
19dB
P
roduct Measurement
W250×D250×H498
（
mm
）
P
roduct Weight
Approx. 6.0kg (Including filter)
P
ower Plug
*
1
C
ord Length
Approx. 2.0m
(Power cord is for AC 220-240VAC.)
*
T
his product uses an original "dual counter fan" to effectively clean the air of the entire room.
"Total air volume" refers to the amount of air that flows through the 360° Deodorizing Dust
Collector Filter that becomes purified and is released through the top air outlet.
*
T
he energy consumption value during Idling mode is measured when the indicator brightness is halved.
Operating Modes
Operating Modes
Jet Cleaning Mode
Manual Mode
30
minutes
20
minutes
10
minutes
20
minutes
5
minutes
5
minutes
10
minutes
5
minutes
5
minutes
5
minutes
2.5
minutes
2.5
minutes
R
emaining time indicator during Jet Cleaning Mode
R
emaining time:
Over 20 minutes
R
emaining time:
20 minutes or less
R
emaining time:
10 minutes or less
W
hen the jet cleaning mode finishes, it will return to the previous operating mode.
T
his mode provides the optimum level of air flow at the highest speed, efficiently purifying the
air in the room. It is especially effective to use before/after cleaning, after ventilation, before
leaving the room, after cooking to remove strong odors such as from a BBQ. Also, you can
choose from continuous operating time of 10, 20 or 30 minutes. When the jet cleaning mode
finishes, it will return to the previous operating mode.
*
T
o cancel the jet cleaning mode, press the Change Modes Button .
D
isplay at the
start of Jet
Cleaning Mode
J
et Cleaning
M
anual Mode Air
Volume 3
M
anual Mode Air
Volume 2
Y
ou can choose from 3 levels of "Air Volume 1, 2, 3" providing a specific level of air
purification. Also, manual mode can be used as an air circulator to improve the efficiency of air
conditioners/heaters whilst purifying the air.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
14
13
P
ressing this will begin the jet
cleaning mode.
How to Use/Explanation of Indicators
How to Use/Explanation of Indicators
How to Use/Explanation of Indicators
P
ress this to turn on child lock.
F
ilter Cleaning Sign
P.20
C
hild Lock Button
T
urning child lock on and off.
J
et Cleaning Indicator
C
hild Lock Indicator
S
elect 10, 20 or 30 minutes.
The remaining time is shown
by the flashing LED.
P
lease clean the filter if this light is on.
T
his will light up when the child lock is on.
This will also blink when the filter cover is
not inserted correctly or when there is
something wrong.
T
o prevent young children from operating the product, pressing the Child Lock Button for
about 2 seconds will turn it on/off
. When the child lock is on, the indicator will light up.
*
W
hen child lock is on, no other functions will work except for turning off the child lock. Also,
child lock can be turned on while the product is switched off.
P.15
P.15,16
Power Switch
W
hen power has been reconnected
T
his will change the operating mode.
C
hange Modes Button
C
ycle of Changing Modes
A
ir volume 3
A
ir volume 2
A
UTO
A
ir volume 1
J
et Cleaning Mode Button
A
ir volume 1, 2, 3
AUTO Mode Indicator
P
ower
Indicator
J
et Cleaning Operation
T
urns the power ON/OFF.
*
W
hen nothing is pressed for more than 1
second, the LED will dim.
O
peration will
start in the mode that
was set before
the power was turned
off. If it was unplugged after the
previous time it was used, it will start
from
Low Manual Mode
.
P
ressing this button during operation will
begin the
Jet Cleaning Mode
, the
optimum air purification function. Every
time the button is pressed, it will change
the operation time from 10 minutes
→
20 minutes
→
30 minutes
→
10 minutes
etc. When the time ends, it will return to
the operation mode that was set before
the jet cleaning mode began.
T
he LED will light up on the
selected mode.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20