Full Text Searchable PDF User Manual
CLASSIC COT
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HK 200
Congratulations on your new quality Love N Care product from our exclusive range of baby products.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.
This cot has been designed for a child up to 25kg
Do not leave your child unattended when the dropside is in the lower position
RECOMMENDED MATTRESS SIZE: This cot has been manufactured for use with a mattress which measure
760mm wide by 1310mm long and 130mm in thickness.
sides and ends of the cot will not exceed 40mm. This is to minimize the risk of a childs limb becoming
is greater than 500mm with the mattress base in the lower position to minimise the risk of a child climbing
or falling out of the cot.
WARNING TO PREVENT FALLS, THE MATTRESS BASE OF THIS COR SHOULD BE ADJUSTED TO THE
LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
The manufacturers assembly instructions must be followed in detail to ensure all the safety features of the
cot are not compromised.
Please ensure that the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
Please keep medication, string, elastic,small toys or small items, such as money out of reach from any
position in the cot.
WARNING: TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 130mm.
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard:
AS/NZS 2172:2003 Cots for household use - Safety Requirements
WARNING
PARTS LIST
Ф
8*4*30mm
10
Ф16*28
mm
Ф15.8*51.5
mm
M4*20
mm
M4*20
mm
M6*40
mm
Ф14.5*11.5
mm
8
8
ASSEMBLY
Attach the ends to the base
Attach the fixed side
Please note: do not tighten
completely at this point
For newborn babies always place
the base in the highest position
until the child is able to sit up
unassisted. Once the child is able
to sit up unassisted use the lowest
level. (as shown in FIG1)
2
2
2
2
5
6
5
5
5
6
6
6
1
10
10
3
DRAWER ASSEMBLY
ASSEMBLY
Attaching the dropside
Please note: Tighten all screws
10
4
ASSEMBLY
DRAWER ASSEMBLY
2
4
1
2
3
2
9
9
9
9
9
9
8
8
8
8
4
2
2
9
8
7
7
7 7
ASSEMBLY
Slide the drawer on the rails under the base
ASSEMBLY
Remove the dropside from the cot leaving the fixed side attached.
Add the mattress and you can now use it as a Lounge(sofa)
CONVERTING COT TO LOUNGE (SOFA)
CARE AND MAINTENANCE
ALL LOVE N CARE PRODUCTS HAVE ONE YEAR WARRANTY FROM THE DATE OF PURCHASE.
IT IS RECOMMENDED TO REGULARLY INSPECT AND MAINTAIN MOVEMENT OF LOCKING DEVICES AND SECURITY
OF ESSENTIAL COMPONENTS.
REGULARLY CHECK ALL PARTS FOR WEAR AND TEAR.
YOUR FURNITURE MAY BE CLEANED BY WIPING WITH A DAMP CLOTH AND DRYING WITH A SOFT CLEAN CLOTH.
DO NOT USE ABRASIVES, BLEACH, ALCOHOL OR AMMONIA-BASED HOUSEHOLD POLISHES.
TAKE CARE WHEN HANDLING OR MOVING THE FURNITURE. CARELESS HANDLING MAY CAUSE DAMAGE.
CHECK THE COT SCREWS AND LOCKS TO MAKE SURE THEY ARE ALL KEPT IN GOOD WORKING ORDER.
IF ANY OF THE PARTS ARE MISSING OR BROKEN YOU SHOULD CONTACT THE MANUFACTURER AND DISCONTINUE
USING THE COT UNTIL THEY ARE REPLACED.
WARRANTY AGAINST DEFECTS.
All Love n care products are guaranteed for twelve months from the date of purchase.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
This covers against faults which develop through faulty materials and workmanship. Misuse, accidental
damages, normal wear and tear or neglect are not covered.
If a fault becomes apparent, please return the item to the store of purchase with your receipt.
You must inform the store what the defect is. We will then arrange for its repair or it will be assessed for
remedies under the law in relation to the goods or services to which this warranty relates.
If you are unable to return the item to the store of purchase, you can contact Love N Care on free
call 1300 732 599. We will then organise for either somebody to inspect the item or arrange for a
courier to pick it up and return it back to you.
Head Office:
Love N Care Australia Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: 02 9774 4633
Email: info@lovencare.com.au
Website: www.lovencare.com.au
Contact Us