Full Text Searchable PDF User Manual
TOO
LS
FLO
ORS
What’s in the carton
STEP
11
Vacuum cleaner
Handle
Carry handle
Upper hose
retainer
Lower hose
retainer
Hose release wand
A
and wand
B
Filter cleaning
brush
Dusting
brush
Crevice
tool
Turbo nozzle
W
A
N
D
11
W
A
N
D
22
Hose
Extra belt
Turbo holder
Dust
cup
Easy assembly
Remove dust cup.
Place handle on
vacuum; push down
to snap in place.
Slide carry handle into back of
handle. Snap into place.
STEP
22
!
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
Insert top tab of turbo holder into handle.
Place thumbs on each side and snap
bottom corners into place. Turn knob to lock.
Empty dust
cup after
each use.
No screws
or tools
required!
Place lower hose retainer
in slots on back of vacuum.
Push down past rib.
To install hose connector,
align tab at right and
snap on at left.
Pull out bottom of lower hose
retainer and position hose.
Place hose over
upper hose retainer.
Get ready to vacuum
TOO
LS
FLO
ORS
Step on power switch to turn
on; step on again to turn off.
Step on handle release to
lower handle into position.
To vacuum floors, turn
air path knob to ‘floors.’
Adjust height for
carpet or bare floors.
For quick clean: tap filter. To clean thoroughly: grasp filter
and twist to remove from lid. Brush off debris.
STEP
33
Clean and assemble dust cup
STEP
44
!
Power
switch is
marked
for
on-off.
I
Attach tool to end of wand. Turn air path knob to ‘tools.’ Store
tools on carry handle and turbo nozzle in holder.
Pull back latch to lift off lid.
Align tab with slot to reinstall screen. Grasp filter and twist in lid
to reinstall. Align lid at front; press down until lid snaps.
Remove screen. Rinse screen,
filter and dust cup.
Dry thoroughly
.
Push
A
onto end of hose;
slide
B
over
A
. Place over
bottom hook; snap in at top.
Push cord into carry handle
and upper cord retainer.
Wrap cord.
Place dust cup on vacuum.
Push back to latch.
AS1000 Series
THANK YOU FOR PURCHASING YOUR NEW EUREKA VACUUM!
Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
Please take a few moments to read this Quick Start Guide. It is designed
to help you assemble your vacuum easily.
To view our “How to Assemble” demo, visit www.eureka.com/airspeed/assembly
If you have questions about your new vacuum, please contact our
customer service helpline at
1-800-282-2886
. We’re here to help!
Important Safeguards
REGIST
RATION
OWNER’S
GUIDE
3
5
Place upper hose retainer
on back of handle.
Push
up
to snap into place.
2
1
9
10
11
12
8
7
QUICK START GUIDE
Follow
1-12
in order
to ensure
proper
assembly.
4
Snap!
WAND
WAND
2
1
6
A
A
B
B
C
A
B
Air path
knob