PDF User Manual

  1. Home
  2. Manuals
  3. DDpai mini User Manual

DDpai mini User Manual

Made by: DDpai
Type: User Manual
Category: Dash Cameras
Pages: 1
Size: 0.96 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Instructions for use

Package Contents

mini Camera at a Glance

Getting Started

mini Camera ×1

3M Sticker ×1

1

3

2

Shaft
Plastic stent
Mic
Speaker

Support up to 32GB TF Card. Class 10 is necessary.   

Do not plugthe TF card when the Camera is working.

For Android/IOS Apps, Please search for

 DDPai

 in Google 

Play or App Store, download and install. 

iPhone Settings — WLAN — Select vyou_DDPai_mini —  

Enter thePassword 1234567890 to connect the camera 

AP— Launch DDpai App and the camera will be displayed 

in the camera list.  

1. App Download

4. Take a photo or record video

5. Photo Album management and Share the photos

6. Pair the remote button to camera

Enter the setting to modify the general settings. To change  

the camera setting, you must connect the camera and enter 

the camera settings. You can change the image quality, 

mute the mic, adjust the volume etc.

7. Other settings

2. Connect the Camera to mobile phone

3. Live Preview ,playback and video clips download

For iPhone:

Launch DDpai App— Click “+” to Search the camera —  

SelectDDpai_mini in the WiFi list — Enter the Password 

1234567890 to connect camera.   

For Android:

Attention

5

Apps and Camera firmware continuously update.

Store temperature: -20

~70

Stain on the lens would seriously reduce the image 

quality. Cleaning tool is very simple: the lens paper with 

a cloth or a fine tool, lens brush and cleaning sets. Do not 

use cardboard, paper towel or napkin to clean the lens.

In case of some troubles or damage do not attempt  

repairing the camera by yourself. The camera must be 

repaired or adjusted only by specialists.

When this product reaches its end of life, take it to a 

collection point designated by local authorities for the 

recycling of electronic equipment.

Please plug the USB cable in the 2.1A output of the car 

adapter. 
Please do not refit the power supply.
You can stick the remote snap button on the Console,   

beside thegear, or on the steering wheel. DO NOT put 

 it on the position of Airbag.

Note:

User Manual

Download video clips: 

In playback mode, click the scissors 

icon to launch download UI, and drag the progress bar and 

find the video clips to download.

1. Main hardware

2. Technical Parameters

Specifications

6

CPU: 

1080P@30fps/H.264 encoder             

Image Sensor: 

Sony 1/2.9 inch Exmor CMOS Sensor

Lens: 

6-glasses, 140°Wide Angel, F1.8      

Wireless:

 WiFi & 2.4GHz

Storage:

 Class10 TF Card, up to 32GB            

Video Output:

 Wireless video stream to mobile phone 

G-Sensor:

 three axis acceleration sensor, collision latch, 

APP ajusting sensitivity.

Video pixel:

 1920x1080@30fps

Camera pixel:

 1920x1080

RAM:

 128M

1

4

3

6

2

5

8

7

9

1

3

2

4
5
6

1

3

2

4
5
6

Working  Indicator  ( Red )

Micro USB Power Socket

TF Card Slot

Parking mode ( Blue )
Reset Button

1
2
3
4
5

6

9

Remote Snap Button

10

7
8

10

1

2

Remote Snap ×1

3

Car Power Adapter ×1

4

Removable Sticker ×1

USB Cable ×1

5

6

1

2

2

3

4

5

1

2

3

4

Stick the plastic stent 

onto the windshield

( note the position ).

Insert the TF Card into 

the Slot

(note the direction).

Connect the USB cable with camera and Car adapter. 

When the car starts up, the camera will boot up 

automati cally with voice prompt “Hello”.  

Note: For Android, do not connect the camare WiFi in 

phone settings. If forgotten the password, press the reset 

button for a few seconds to restore factory settings. The 

initial password is 1234567890.  

Preview:

When the mobile phone is connected to the 

Camera, click play button to preview the Real-time video. 

Playback: 

In full-screen preview mode, drag the progress 

bar or slide the touch screen, and find the photo that you 

need by thumbnail images and playback.  

Click the remote snap button to capture a photo. Switch on 

the “10s video” option in the camera setting to record 10 

seconds video (5 seconds before and after the click 

action). The photos and videos will be specially stored in 

the Camera TF Card and wait a few seconds to be 

transferred into your mobile phone. 

Check all the photos and videos in photo album. You can 

choose several photos to add to favorite, or delete, or 

share to social network. 

If the remote snap doesn’t work,press the button to check 

the indicator light.If the indicator light is on, please enter 

the Camera Setting-Advance Settings-remote controller 

pairing,and take the remote sanp near the camera and 

press  the button several times to pair.

If the indicator light is not on, the battery may have run 

down. Please open the rear cover of the remote snap and 

replace a new battery cell. 

For frequently asked questions , please enter "Me-Help".