Full Text Searchable PDF User Manual
45 Watt RGB LED Illuminator
wdmlighting.com | 2603 Oaklawn Ave. Ste. 120, Dallas, Texas 75219 | 800-893-9787
wdmlighting.com | 2603 Oaklawn Ave. Ste. 120, Dallas, Texas 75219 | 800-893-9787
Description:
Our 45 Watt Illuminator was created to provide
a powerful alternative for lighting applications
where low voltage and brilliant colors are re-
quired. Control via an ir remote and includes
solid color, color washing & color change effects.
As it cycles through the color wash effect, you
can pause it on your favorite shade of color.
Holds up to 400 .75mm fibers.
Features:
• High efficiency LED light source
• Ultra compact form factor
• Full spectrum of colors without use of color
wheel
• No electricity or heat at illumination point
Applications:
• Ambient lighting down light applications.
Simply add lenses to the end of the stranded
fibers and you’ve created a super efficient
replacement for 3-4 40-50 watt bulbs.
• Architectural Lighting Applications: Light
more than 50 ft of solid core fiber with neon
like color! Illuminate up to 100 ft by pump-
ing the fiber from 2 sides.
• Under Cabinet Lighting for residential and
commercial uses.
• Entertainment Lighting.
45 Watt RGB LED Illuminator
wdmlighting.com | 2603 Oaklawn Ave. Ste. 120, Dallas, Texas 75219 | 800-893-9787
1. SAFETY FIRST
When using this machine:
Please make sure the correct supply voltage is
used.
The product should not be demolished to avoid
danger.
This machine is
NOT
waterproof,
please keep dry.
Machine must have ventilation.
Do not use in an enclosed environment.
2. POWER CORD
Plug the power cord in to an appropriate
outlet.
Turn the power on to the light engine by
switching the power switch to the “I” position.
The “o” position is off.
3. OPERATION BUTTON
When pushed the red button on the back
will change the mode the light engine is in.
If the light engine is in color change mode (red,
green, blue etc) push button quickly (you will
hear a beep) to stop on desired color in the
color change mode.
To go from one mode to the other: (color
change to color fade) hold red button down until
beep.
If the light engine is in color fade mode (red
fade to green, green fade to blue etc) push but-
ton quickly (you will hear a beep) to stop on
desired color in color fade mode.
45 Watt RGB LED Illuminator
Operation Manual
5. FIBER CONNECTION
Insert fiber into coupler and cut the ends off
with a hot knife or sharp knife then polish. In-
sert coupler into coupling head on illuminator
and fasten set screw.
6. PARAMETERS TABLE
45 Watt RGB LED Illuminator
Operation Manual
4. BUTTON FUNCTIONS FOR THE REMOTE:
• On the remote you will see the letters A,B,C,D. Here is what each of
them do.
• A is Color Change. The colors will jump from Red, Green, Blue etc.
to White then back to Red. (Color Hopping)
• B is a Continue button. After you push (D) to pause on a certain
color you can push (B) and it will continue the color cycle on Color
Change or Color Fade. Which ever one you had it on.
• C is Color Fade. The colors will fade from Red to Green to Blue etc.
to White then back to Red. (Gradient Colors)
• D is the Pause button. If you would like to stop the illuminator on a
certain color while in Color Change (A) or Color Fade (C) push the D
button and it will stop on that color.
wdmlighting.com | 2603 Oaklawn Ave. Ste. 120, Dallas, Texas 75219 | 800-893-9787
Remote Control:
Model
Dimensions Weight
Voltage
Power Temperature Coupling
Caliber
Quantity
KDY-RGB-
LED-16
6.5x6.5x1.5
Inches
1.4 lbs
110v~265v
50Hz~60HZ
16w
-10~40ºC
20mm
0.75
500
Root
KDY-RGB-
LED-32
6.7x3.7x2
Inches
1.8 lbs
110v~265v
50Hz~60HZ
32w
-10~40ºC
20mm
x 2
0.75
1100
Root
KDY-RGB-
LED-45
12x8x3.2
Inches
9 lbs
110v~265v~220v
50Hz~60HZ
45w
-10~40ºC
30mm
0.75
1200
Root
wdmlighting.com | 2603 Oaklawn Ave. Ste. 120, Dallas, Texas 75219 | 800-893-9787
Rear View
Remote Control:
45 Watt RGB LED Illuminator