Full Text Searchable PDF User Manual
1
Table of contents
Preliminary remarks
Packing list
.2
Precautions
HDD installation guide
.4
Back panel connection guide
Remote control instruction
Operating &setting up
Technical specifications
Trouble shooting guide
..................................................................2
.............................................................................
.............................................................................3
.............................................................
...................................................5
Front panel overview...............................................................6
........................................................7
..............................................................9
...........................................................23
..............................................................24
INSTRUCTION
2
3
Preliminary remarks
Thank you for purchasing the SYVIO 200A.Please read this manual before operation
SYVIO 200A.Store the manual in a safety, easily accessible place for future reference.
Packing list
Please check the contents of SYVIO 200A package and confirm that all the items listed
below are included.
1.Adapter(Output DC12V/3A)...... 1pc
2.Remote control........................ 1pc
3.SYVIO 200A.............................1pc
4.Bracket................................... 2pcs
5.User manual............................1pc
6.HDMI cable............................. 1pc
7.Battary(1.5v/AAA)................... 2pcs
8.Screw..................................... 8pcs
Precautions
In this instruction manual,''Warning'''and''Caution''are defined as follows.
Warning:Misuse may potentially cause injury to
the user or physical damage to the objects involved
Caution:Missue may potentially cause death or
serious injury to the user.
For your own safety,be sure to comply with these precautions.
Place station
1.Do not place wet station
2.Do not place quivery station
3.Do not stack
Note:
1.Do not turn off directly for protecting HDD
2.Please unplug all the connector if SYVIO 200A does not work for a long time
3.Do not use cauterant to clean SYVIO 200A
INSTRUCTION
4
HDD installation guide
The SYVIO 200A's sale list does not include HDD,the user gets it and installs HDD for the NMT
functions.The SYVIO 200A supports SATA HDD and its installation guide as below.
1)Fix bracket for the hard disk
2)Undo the bottom screw of the player and pull the top cover board of the player
3)Put the hard disk into the player and fix screw
4)Shut the top cover board of the player and fix the bottom screw
Note:Please turn off the player and unplug all the connector before installing hard disk.
Connect to HDMI port of your LCD/PDP HDTV set
HDMI CABLE
TV
YPbPr Cable
CVBS/LR
S-video
Output
Output
Output
TV
Amplifier
Coaxial Output
USB Slave Connection
PC
Router
Network Connection
Adapter
Power
5
INSTRUCTION
Back panel connection guide
Installation of 2.5 HDD
Installation of 3.5 HDD
1
2
3
4 5
6
7 8
1--Reset button
Press to reset your unit
2--Host usb port Connect USB storage device
3--IR receiver
4--Power LED:this led is light when the unit has been turned on
5--STB LED:this led is light when the unit is on the standby mode
6--ACT:this led is light when the unit is connected to LAN
7--USB slave LED:this led is light when the unit is connected to PC.
8--HDD LED:this led is light when the hard disk of the unit is working
Front pannel overview
Remote control instruction
INSTRUCTION
6
7
HIGH DEFINITION CITY
BT
DELETE
CAPS
NUM
0-9
Power:press to turn on the unit or off
FIFLE MODE:displays file and folder
customization
SETUP:jumps to the setup menu screen
During video playblack,this key allows
customization of the display output
SUSPEND:this key is reserved for
future use
PAGE UP:moves up a page on a list
of media files.Increases the volume
media playback
PAGE DOWN:moves down a page on
a list of media files.Decreanses the
volume during media playback
TV MODE:Quick access key to set
a TV output resolution.
MUTE:mutes the audio output
USB DVDROM EJECT:eject an
attached extenal DVDROM drive
or a media playback
DELETE:to erase alphanumeric
values during input
To switch between capitalized,
numeric and non-capitalized
letters during alphanumeric
value input
Alphanumeric keypad:allows user
to input alphanumeric characters.
8
INSTRUCTION
Make sure the
H
DD has been installed to the SYVIO 200A and then turn on the SYVIO 200A ,the logo of nmt
installation guide is displayed.If you do not want to use the function of NMT, please cancel it.
There are two methods of the NMT installation,as bellow:
The first method:Install NMT from the U disk,you may download the installation file from
(http://www.syvio.com.cn/syvio/nmt/updnmt.htm) and copy to the U disk.
Following figure1 2 3 4 5 shows the steps:
*How to install NMT's software to the SYVIO 200A?
Operating &setting up
Home
Preferences
Audio/video
Network
Network share
NMT Applications
Maintenance
Firmware version :50-17-080813-CMI-402-000
Kernel version :14-CMI
NMT version :50-17-080813-CMI-402
Cardea license :Not available
Check for firmware update
Reset to factory settings
NMT setup wizard
Figure1
9
INTER
A
A
Return:renturns to the prev-
menu screen
Source:press to the media
source screen
INFO:press to display the
current info of file
ENTER:select the currently
highlighted selection or plays
the highlighted media files
Directional keypad:allows
you to navigate and high
lighted options
HOME:press to return to the
media filters menu screen
TIME SEEK:Allows you to
time-seek the current media
file
ZOOM:press to zoom the
screen when the photo and
media file playback
Menu:jumps to menu
screen when playback
PREV:Skips backward to
the prev-file
PLAY:Press to play the
selected media file
NEXT:skips forward to
the next file
TITLE:opens the text
input box for URL input
REV:rewinds the current
playback
AUDIO:Press to switch
the audio mode
REN key:jumps to the
video filter
BLUE KEY:Jumps to the
other media filter
GREEN KEY:jumps to the
music filter
Yellow key:jumps to the
photo media filter
STOP:Stop the current playback
and return to the menu screen
FWD:press to control the playback
speed
Repeat:repeat the current media
file
Angle:Switch the camera or viewing
angle during playback
Pause
pause the current the media
playback
Slow:Slows down the current media
playback
SUBTITLE:turn on the subtitles and
toggles when playback
// NMT setup wizard
[Warning]
"Typcial setup will install the NMT Appllications
Without removing your media files,
If this is your desired option,press[next] to continue.
Next Cancel
Back
// NMT se tup wizard
Next Cancel
Back
// NMT se tup wizard
Setting
Please waiting
Downloading image...
Please choose the NMT setup source
online
USB
10
11
INSTRUCTION
Figure2
Figure4
This setup process will install the following
Networked Media Tank(NMT) Applications
[Samba Server]
[Torrent Server]
[UPnP AV Server]
[mylHome Server]
Typical setup(Install NMT Applicatiopns without removing media contents)
Fresh setup(Reformats hard drive and installs NMT Applications)
// NMT Setup wizard
Figure3
Figure5
The second method:Install NMT online
Following figure6 7 8 9 10 shows the steps:
1-3/3
Home
Preferences
Vidoe/audio
Network
Network share
NMT applications
Maintenance
Firmware version :50-17-080813-CMI-402-000
Kernel version :14-CMI
NMT version :50-17-080813-CMI-402
Cardea license :Not available
Check for firmware update
Reset To fActory setting
NMT setup wizard
Figure6
Figure7
Figure8
Figure9
This setup process will install the following
Networked Media Tank(NMT) Applications
[Samba Server]
[Torrent Server]
[UPnP AV Server]
[mylHome Server]
Typical setup(Install NMT Applicatiopns without removing media contents)
Fresh setup(Reformats hard drive and installs NMT Applications)
Next Cancel
// NMT Setup wizard
// NMT seyu pt wizard
[Warning]
"Typcial setup will install the NMT Appllications
Without removing your media files,
If this is your desired option,press[next] to continue.
Next Cancel
Back
// NMT se tup wizard
Next Cancel
Back
Please choose the NMT setup source
nline
USB
INSTRUCTION
Figure10
12
13
The SYVIO 200A allows the user to update
firmware for supporting the future media
containers,codecs and features.there are
two methods of update firmware.as bellow:
The first method:Update firmware from U
disk,you may download
from(http://www.syvio.com.cn/syvio/firmw
are/update.html) and copy to U disk.
Figure11 12 13
shows the installation steps:
Media source
Web server
Setup
//DARD-DISK
*How to update the firmware of the SYVIO 200A?
Figure11
//USB_DRIVE A-1
Media source
Web services
Setup
01 usbupdate.html
1-1/1
Figure12
Figure13
The second method:Update firmware online, figure14 15 shows the steps:
Figure14
Figure15
// NMT se tup wizard
Setting
Please waiting
Down loading image...
Home
Preferences
Audio/video
Network
Network share
NMT Applications
Maintenance
Firmware version :50-17-080813-CMI-402-000
Kernel version :14-CMI
NMT version :50-17-080813-CMI-402
Cardea license :Not available
Check for firmware update
Reset to factory settings
NMT setup wizard
//Firmware updating
Writing kernel 15%
15
INSTRUCTION
Quick TV mode settiing
For quick settings of the output video mode, please use the "TV Mode" key on the remote control,
following with one of the numeric keys, as below:
TV Mode + 0 = Auto TV mode
TV Mode + 1 = Component/Composite NTSC 480i
TV Mode + 2 = Component/Composite PAL 576i
TV Mode + 3 = reserved
TV Mode + 4 = Component 720p60
TV Mode + 5 = Component 1080i60
TV Mode + 6 = Component 1080p60
TV Mode + 7 = HDMI 720p60
TV Mode + 8 = HDMI 1080i60
TV Mode + 9 = HDMI 1080p60
TV Mode + CAPS/NUM = Toggles between 50Hz and 60Hz
Media Source
This page is used to select which source you
want to stream content from. If a hard drive
is connected it will show as the first item on
the list.
Web Services
This page gives you access to Internet
based services like the internal radio,
Media Service Portal(MSP),BitTorrent
client status display and customizeable
URL's for your most frequently visited sites .
14
16
17
INSTRUCTION
Setup
This page allows you to configure various
settings for your device:
Home
- Takes you back to the Media Source
page, or the last server you logged into.
Preferences
- General settings for the device
like languages, subtitle languages,photo
transition effects, locking the Setup pages,
etc.
Audio / Video
- Digital/Analogue Video output settings as well as aspect ratio control and
digital/analogue audio output settings.
Network
- Displays current IP information and allows configuration of network and timezone
settings.
Network Share
- Configure your remote SMB and NFS shared folders here.
NMT Applications
- Configure the NMT media servers run state, SMB workgroup, device name
and also the unified password which applies to both SMB and FTP access. Torrent settings
allows the configuration of the BitTorrent client.
Maintenance
- Displays the current device firmware version and options for firmware update
and NMT morphing
How to set up network share?
You can choose to browse the available SMB shares on a Samba network. NFS shares will have
to be entered manually.URL format for the network share paths:
SMB - smb://<ip address>/dir
NFS - nfs://<ip address>:/dir (note the extra colon after IP address)
- nfs-tcp://<ip address>:/dir (NFS using TCP protocol instead of UDP)
18
19
INSTRUCTION
*
NAS (SMB server)
This server allows a remote PC to access the locally installed HDD on the NMT as a SMB
share.
Usage Instructions:
1. Click on Start->Run
2. Type "\\<NMT Hostname>" or "\\<NMT IP ADDRESS>" into the text box
3. To allow for easier accesses to your NMT NAS in future, you can choose to map the SMB
share as a drive under your "My Computer" folder of your PC. To do this:
a) Type "\\<NMT Hostname>" or "\\<NMT IP ADDRESS>" into the text box.Alternatively you
can go to "My Network Places", click on "View workgroup computers", browse and select your
NMT device.
b) Right click on the shared folder and select "Map Network Drive
How to set up NMT?
* UPnP AV Server
A standard UPnP AV server for streaming media directly from the NMT's HDD. The server
name will be displayed as '<hostname>: UPnP AV Server'.
Usage Instructions:
- Under Setup->Media Server, you can see the current status of the media server.
A running server will be detectable and accessible by all UPnP AV or DLNA compliant DMP
- You can also access this server from a PC by going to the following link from a web browser :
http://<NMT IP Address>:8088/
* FTP Server
Allows easy remote access and management of the NMT's HDD. The server is always running
by default after installing the NMT applications.
Usage Instructions:
- The FTP server runs on the default port (21). So just point your FTP client to <NMT IP
Address>
Username: ftpuser
Password: 1234 (default)
Note: FTP username is not configurable, but the password can be configured and is shared
with the SMB server.
c)Select the drive you want your NMT
shared folders to be represented.
20
21
INSTRUCTION
This server allows a remote PC to access the locally installed HDD on the NMT as a NFS share.
Usage Instructions:
The path to the NFS server on NMT is <NMT IP ADDRESS>:/share
*
NAS (NFS server)
d) The mapped drive should appear in "My Computer".
- SMB defaults:
Username: nmt
Password: 1234
* Torrent
A BitTorrent client for direct download to the internal HDD.
Usage Instructions:
- Torrents can be managed by either clicking the Web Services->Torrent links from the NMT,or
using a web browser on your PC and going to the following URL :http://<NMT IP
ADDRESS>:8883/torrent/bt.cgi or follow Torrent links from
http://<NMT IP ADDRESS>:8088
- Alternatively, for Windows XP, you can goto Start->My Network Places->Network Tasks.
Select the 'Show Icons for networked UPnP devices' option. The NMT will show up with it's
hostname. Double clicking on the icon will
bring you to a page that will allow you to select the Torrent option.
- You can upload torrent files and control the
torrent download settings from this page.
- Torrent files are started automatically
whenever the NMT browser encounters a
.torrent file.
You can also load .torrent file from USB storage
devices.
- You can also configure some client settings
from the Setup->Torrent page on the NMT.
22
23
INSTRUCTION
How to operate usb slave function?
This only applies to some models which ship with a USB-PC connector, which allows
connection of the NMT to the PC and the HDD on the NMT will appear as a USB HDD
to the PC.
1. Power up NMT unit, plug in the provided cable between the USB-PC connector to a USB
slot on your PC.
2. When the unit is idle or in Browser mode, it will immediately switch the internal HDD to make
it visible to the PC as a USB HDD.
3. During this period, the NMT can still function as a basic DMA, all NMT applications will be
stopped at this point, however.
4. Note that as the HDD on the NMT is formatted as a EXT3 partition by default, you will need
a special driver to support EXT3 on Windows PCs. Linux PCs will be able to support it without
additional drivers. A suggested driver is
EXT2FSD.
5. After completing your file operation on the USB HDD from your Windows PC, it is advised
to"Safely Remove Hardware" by clicking on the USB icon in the Windows taskbar before
unplugging the USB connection. Otherwise, a power cycle is required to get the internal
HDD back into normal operation.
6. When not using the USB slave function, it is advised not to leave the cable plugged in.
''
''
''
''
Technical specifications
Operating system: Linux
Network agreement: TCP/UDP DHCP
FTP/TFTP
SMB
NFS
HTML
Safe agreement:SSL2.0/3.0
File system:EXT3
Processor: Sigma Designs(SMP8635)
Memory:DDR400 (32MB*4)
Flashrom:256Mb
Hard disk:SATA interface
Support video format:
DIVX
XVID
VC-1
TP
TS
WMV
WMV9
MPG
DAT M2TS
VOB
AVI MOV
MP4
MKV
Support audio format
MPEG AUDIO PLAYER1&2
WMA
OGG
AAC
AC-3
DTS
FLAC
WAV
Support picture format:JPEG
GIF
Bitmap
PNG
Video output interface:S-video x 1 ; composite x1;Component x 1 ; HDMI(1.3a) x 1 (up to 1080P)
Audio output interface:Stereo x 1 ; SPDIF Coaxial x 1 Optic x 1
Data interface:USB2.0 Slave x 1 ; USB2.0 Host x 2 ;WIFI802.11N;Ethernet10/100M
Power
DC+12V/3A
24
Troubleshooting guide
For further assistance,please contact SYVIO distributor in your country,
or below support contact from CMI:
Tel:+86 755-83458820
support@syvio.com.cn
QUESTON
Solution
Power LED is not light
No picture
No audio output
RC does not work
Not connect internet
Check that power cable have been connected safely.
Check the video resolution to comply TV
Be sure that the audio device supports related audio code
Be sure that the battery have been installed rightly
Be sure that the IP is available,the level of singal is enough.