StartVision SV-IP206 Series User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

Installation and Operation Manual

V2.0

1.1 Hardware/Software requirements:

1. Product Introduction
2. Installation
3. Search equipment and

log into the network camera

4. Video attribute settings and

PTZ(Pan/Tilt/Zoom) control operations

5. System Settings Options
6. Alarm settings
7. Control panel
8. Advanced Setting
9. Diagnostic Tools
10. Logout
11. How to Access IP camera via

WAN(Wide Area Network)

12. How to Access IP Camera

Through Intelligent Mobile Phone

21
24
25
25

1 Product Introduction

Thank you to use wired/wireless IP Camera solution. IPCAM

is a electronic equipment which is able to transmit dynamic video

stream to all over the world through the network. The user can

always monitor the place he wants from anywhere, as long as he

is able to connect to Internet.

ASW IP camera works based on the TCP/IP standard. A WEB

server is integrated inside which can support Internet Explorer.

And this feature can help you to accomplish online management

and maintenance on your device simply, such as remote

configuration, remote start-up and firmware upgrade.

You can use the IPCAM monitoring homes, offices, factories,

stores, nurseries and etc, simply, conveniently and real-time.

To use the computer-camera through networks, the minimum

hardware requirements of your computer should be met,

1. Pentium III CPU or better, 1GHz or higher frequency;

2. At least 256M memory;

3. windows xp, windows 7, 2000 or above operation system

Internet explorer version 4.0 or above, IE 6.0 is strongly

recommended.

1.2 Product features:

Ｓｉｍｐｌｅ　ｉｎｓｔａｌｌａｔｉｏｎ：

It is very simple to install IP cameras. If

you choose wired networking solution, you only need to prepare

power and networks connection. If you want to use WIFI wireless

connection, only power is a must.

Ｓｃｏｐｅ　ｏｆ　ａｐｐｌｉｃａｔｉｏｎｓ：

Apply to homes, offices, enterprises,

supermarkets, schools and other public places.

HD IP CAM 1280 720 Manual

Installation and Operation Manual

V2.0

1.3 Packing list:

● IP Camera SV-IP206 Series

● WIFI Antenna(only supply for wireless camera)

● CDROM(include user guide, control, search equipment)

● Power adapter

● bracket

1.4 Interfaces

Ａｕｄｉｏ：

Used to connect headphones, monitor the user's

voice

ＡＮＴ：　

used to connect the antenna

ＤＣ５Ｖ：

Used to connect the power adapter.

ＲＥＳＥＴ　ＢＵＴＴＯＮ：

In the bottom of the camera. If user forget

he password, just press this bottom for more than 5 seconds,

then user can restore to factory settings.

Ａｄｊｕｓｔ　ｃａｍｅｒａ　ｌｅｎｓ：　

Gently rotate the lens until the image is

clear .

Ｓｕｐｐｏｒｔｉｎｇ　ｍｕｌｔｉｐｌｅ　ｐｒｏｔｏｃｏｌｓ：

Embedded operation

system supports the TCP / IP, SMTP (simple mail protocol),

HTTP, UPNP, etc.

Ｓｉｍｐｌｅ　ｃｏｎｆｉｇｕｒａｔｉｏｎ：　

Standard Web browser GUI can help

users to control and manage the IP cameras through LAN or

Internet.

Ｖｉｄｅｏ　Ｗａｔｃｈｉｎｇ　ａｎｄ　Ｖｉｄｅｏ　Ｒｅｃｏｒｄ：　

Provide concise GUI for

user to watch real-time video stream from anywhere networking

connection is available. And the video segments can be recorded

on your computer.

Ａｌａｒｍ　Ｍｏｎｉｔｏｒｉｎｇ：　

Through external alarm device, the alarm

information can be sent to your e-box or your mobile phone.

Especially, user can activate motion detection function to detect

any movement in the selected area. If any illegal invasion

happens, alarm will be realized. Simultaneously, the captured

images will be sent to email address specified by user.

Ｓｕｐｐｏｒｔ　ｄｙｎａｍｉｃ　ＤＮＳ：　

Support Dynamic DNS. Users can

access his/her IP cameras easily through DDNS despite that the

camera IP changes frequently.

Ｓｉｍｐｌｅ　Ｕｓｅｒ　Ａｕｔｈｏｒｉｔｙ　Ｍａｎａｇｅｍｅｎｔ：　

Setting USER and

PASSWORD of the system can help user to protect privacy

effectively, meanwhile, users can be authorized with different

permission levels to operate the IP camera.

Ｒｅａｌ－ｔｉｍｅ　Ｍｏｎｉｔｏｒ　ｔｈｒｏｕｇｈ　Ｉｎｔｅｌｌｉｇｅｎｔ　Ｍｏｂｉｌｅ　Ｐｈｏｎｅ：　

With the assistance of professional client software

ＩＰ　Ｃａｍ　

Ｖｉｅｗｅｒ

, user can access any online IP Camera anywhere

through intelligent mobile phone, iPhone or Android-OS

(Operation System) based mobile phone and run routine PTZ

operations. User can download IP Cam Viewer software from CD

delivered in package box to your intelligent mobile phone. Please

confirm your mobile phone has iPhone OS or Android-OS and

choose the correct software version.

Installation and Operation Manual

V2.0

2 Installation

2.1 Hardware installation

２．１．１　Ｉｎｓｔａｌｌ　ｎｅｔｗｏｒｋ　ｃｏｎｎｅｃｔｉｏｎ：

Insert one crystal head of twisted pair cable into the cable slot

of NIC(Network Interface Card), which locates on the back of IP

camera. Then, connect the other crystal head of the cable to the

router or switch.

Ｔｉｐｓ：　

The length of twisted pair cable should be less than 100

meters, otherwise, the communication will not be stable. If the

connection distance exceeds 100 meters, switch relay is

recommended.

２．１．２　Ｃｏｎｎｅｃｔ　ｔｈｅ　ｐｏｗｅｒ

Connect the IP camera with power slot through power cable

distributed in the package box.

Cautions: Please use the original power adaptor distributed

with the camera device, otherwise, it may cause hardware

damage.

２．１．３　Ｃｈｅｃｋ　ｔｈｅ　ｎｅｔｗｏｒｋ　ｉｎｄｉｃａｔｏｒ　ｌｉｇｈｔ

When the camera works, normally the green indicator of the

IP camera is on continuously and yellow light flashes.

2.2 Software Installation

Software installation is very simple, you only need to

double-click ocx2.exe and installation can be finished

automatically as shown below.

There are two ways to install software.

Ｉ：　ＣＤ－ＲＯＭ　ｉｎｓｔａｌｌａｔｉｏｎ

1. Please put the attached CD into the CD-ROM driver in your

PC.

2. Double-click ocx2.exe and installation can be finished

automatically.

ＩＩ：　Ｄｏｗｎｌｏａｄ　ＯＣＸ．ｅｘｅ　ｆｒｏｍ　ｔｈｅ　ｎｅｔｗｏｒｋｉｎｇ　ｃａｍｅｒａ　ａｎｄ　

ｉｎｓｔａｌｌ　ｔｈｅ　ｓａｍｅ

1. When the software is not installed in your PC, meanwhile,

the camera is connected to the network, you will be prompted to

download and install the control software as shown below. You

can download the same to any folder you want. After

downloading is completed, double-click OCX.exe and automatic

installation will be implemented. Downloading OCX.exe from the

network camera is widely used in case that installation CD is not

available.

（

To restart your browser after installation

）

Installation and Operation Manual

V2.0

V2.

3 Search equipment and

log into the network camera

3.1:Search Ip camera in LAN

ＮＯＴＥＳ：

1: Make sure the equipment is properly connected with the

network and power.

2: The router must support DHCP (Dynamic Host

Configuration Protocol), because dynamic IP addresses

obtaining is one of the factory settings of camera. If the device

cannot get the correct ip address, it will use the default ip

address.

3: The camera cannot be immediately used when power

connection is OK, system initialization will cost more than 20

seconds.

３．１．１　Ｓｅａｒｃｈ　Ｅｑｕｉｐｍｅｎｔ

After software installation, please activate the search tools

ｉｐｃａｍｔｏｏｌｓ．ｅｘｅ．

When GUI comes up, please click "refresh"

button. The program will search the network cameras, and

displays the searched IP address, port number, equipment ID

number ,device name, the machine's dynamic domain name, the

wireless address and MAC address. An example is shown as

following figure.

Note: (ipcamtools.exe is only used to search for the LAN IP

addresses and port numbers of the cameras. However, the tool is

not able to search IP address of the camera as well as the port

number in WAN.

３．１．２　Ｌｏｇｉｎ　Ｎｅｔｗｏｒｋ　Ｃａｍｅｒａ

Click on the "open device" or input the IP into the browser in

its address field directly to access the login page (for example:

http://192.168.1.92). As shown

Installation and Operation Manual

V2.0

“Login button” is one option to enter the user's computer

，

and “Mobile phone login” is another option for users who use the

smartphone. By using ’’Mobile phone login”, user can watch the

video of network cameras and operate a number of common

features of the network camera. When login, user can select the

appropriate language version on the upper left corner

３．１．３　ｕｓｅｒ　ｎａｍｅ　ａｎｄ　ｐａｓｓｗｏｒｄ　ａｕｔｈｅｎｔｉｃａｔｉｏｎ

The default user name and password are both “admin”. For

the first login, enter your user name (admin), password (admin)

and click on the "Login" button to enter the monitor interface, the

user name and password are modifiable. For the security issue, it

is strongly recommended to change the password in control

panel.

After entering the correct user name and password, real-time

images is displayed on the monitor screen.

4.1 Function Description:

Window: the window is defined as video window number

shownin the video region ,the current maximum of which were 100.

You can also use the mouse to control pan and tilt, move the

mouse over the video side, a yellow arrow, and click the left

mouse button to rotate the cloud platform

。

4 Video attribute settings and

PTZ(Pan/Tilt/Zoom) control operations

Installation and Operation Manual

V2.0

Ｒｅｓｏｌｕｔｉｏｎ：

the size of the currently selected video.

Currently supports two sizes:

1280x720

640x480 and 320x240.

Ｍｏｄｅ：　

set the video light mode, and remove the jitter impact

of the image as per the electricity frequency. The following three

modes are used: 50HZ/60HZ /outdoor model. Generally, indoor

mode use 50Hz or 60Hz, outdoor mode should be set as per the

real camera working environment.

Ｖｅｒｔｉｃａｌ　ｆｌｉｐ：　

the video upside down.

Ｈｏｒｉｚｏｎｔａｌ　ｆｌｉｐ：

Reverse the video.

Ｍｕｔｅ：　

Close the sound of the ip camera.

Ｖｉｄｅｏ　Ｐａｎｅｌ：　

Shortcut function keys will be displayed on

monitor screen, which can take photos, video and realize the

function of voice intercom .

Sound Alarm: If selected, when the alarm device is triggered,

computer sound alarm. If not, computer is mute.

Ｃｏｎｎｅｃｔｉｏｎ：　

Connect the selected device address, and

display images in the current window

Ｄｉｓｃｏｎｎｅｃｔ：

Disconnect the

ｓｅｌｅｃｔｅｄ

video connection, and

stop displaying video. If video recording is ongoing, the operation

will stop simultaneously.

Ｓｎａｐｓｈｏｔ．：

Photograph the selected device and save the

photographed image.

Ｖｉｅｗ　Ｓｎａｐｓｈｏｔ：　

Open image folder to view the pictures.

Ｓｔａｒｔ／Ｓｔｏｐ　ｔｈｅ　ｖｉｄｅｏ　ｒｅｃｏｒｄ：　

Start or stop the video record

of the selected device.

Ｓｔａｒｔ／Ｓｔｏｐ　ａｌｌ　ｏｆ　ｔｈｅ　ｖｉｄｅｏ　ｒｅｃｏｒｄ：　

Start or stop the video

record of all the connected devices.

Ｗａｔｃｈ　ｔｈｅ　ｖｉｄｅｏ：　

Open video folder and view the saved

video segments.

Ｉｎｔｅｒｃｏｍ：

Used for users who want to talk thought internet.

Ｆｕｌｌ　ｓｃｒｅｅｎ：

Monitor screen is full screen, in order to view

easily.

ＰＴＺ　ｓｐｅｅｄ：　

User can control the PTZ speed according to

need

Video operation interface is shown as follows:

Description: when the window is selected, the border of the

window will become red. Double-click to select the screen, and

the screen automatically changes to full-screen mode. To return

to its original state, please double-click the screen again.

Ｖｉｄｅｏ　ｐａｎｅｌ；

Video panel is some shortcut keys to achieve

functions

，

where is the video shortcut key , is the camera

shortcut key, is the monitor shortcut key, is the voice
intercom shortcut key, have not defined.

Installation and Operation Manual

V2.0

5 System Settings Options

Ｓｅｎｉｏｒ　ｏｐｅｒａｔｉｎｇ　ｉｎｓｔｒｕｃｔｉｏｎｓ：

All connections:Used to connect with all of the increased IP

camera.

All disconnect: Used to disconnect with all of the increased IP

camera.

Brightness: used to set the brightness of the image.

Contrast: used to set the contrastof the image.

Color: used to adjust the image color.

Saturation: used to adjust the image of the saturation.

The default color: set the default of the image parameters,

typically use this parameters.

Network camera page setup options are in the far right, when

clicking the right arrow, the hidden settings page will be expanded.

Click the left arrow, set the options as follows

Ｆｕｎｃｔｉｏｎａｌ　ｄｅｓｃｒｉｐｔｉｏｎ　ｏｆ　ｔｈｅ　ｓｅｔ－ｕｐ　ｏｐｔｉｏｎｓ：
５．１　Ｌｉｖｅ　Ｖｉｄｅｏ

For viewing video, in any case you can click on this button to

enter the video mode to watch.

５．２　Ｉｐａｄ

Used to vivew by ipad.

５．３　Ｎｅｔ　Ｃｏｎｎｅｃｔｉｏｎ　：

Set the parameters associated with the network connection.

５．３．１　Ｎｅｔｗｏｒｋ　Ｓｅｔｔｉｎｇｓ

５．３．１．１　ｔｏ　ｏｂｔａｉｎ　ＩＰ　ａｄｄｒｅｓｓ　ａｕｔｏｍａｔｉｃａｌｌｙ　（ＤＨＣＰ）：

Installation and Operation Manual

V2.0

5.3.2 Wireless Connection

Select DHCP, device will automatically obtain the IP, which is

not fixed (this feature requires the router to support DHCP

protocol, and this feature should be activated).

５．３．１．２　ｕｓｉｎｇ　ｔｈｅ　ｓｐｅｃｉｆｉｅｄ　ＩＰ　ａｄｄｒｅｓｓ　（ｓｔａｔｉｃ　ＩＰ）：　

To specify

the equipment IP, it is required to manually fill in IP address. Fill

in relevant information by the Depositary and click on the “Save”

button. This function of equipment need to restart to take effect.

Gateway settings generally use the default settings, and the

device uses the router's IP address as the gateway.

１，　ｔｈｅ　ｄｅｖｉｃｅ　ｓｕｐｐｏｒｔｓ　ＷｉＦｉ　ｗｉｒｅｌｅｓｓ　ｃａｐａｂｉｌｉｔｉｅｓ．

If user’s

camera supports wireless networking function. After setting up

WiFi parameters, such as Password, Authentication parameters,

please select "Enable" and restart the device. Then, the user will

be able to access the network through a wireless network of

cameras. (Wireless settings must be in strict accordance with the

password authentication method parameters of the wireless

router, otherwise, it can not connect wireless camera .

5.3.3 MSN

Used to add MSN account.People who have the MSN account

can have the IP address,then can access to ip camera.

If user want to use the wireless feature, firstly,

open , click on , search
for your area wireless router; secondly, choose the router name
of user itself and fill in the wireless router password and the type

of IP address .Generally, user can connect to the router now.

Unplug the network cable at this moment, you should find the ip

camera. Network camera supports WEP and WPA2 encryption.

As the diversity of the router, if one encryption way is not

connected on the router, the user should try to connect to another

encryption method.

Installation and Operation Manual

V2.0

6 Alarm Settings

5.3.4 Dynamic DNS

5.3.6 Reserved Connect

The device supports third-party's domain name

resolution,dynamic DNS of Www.3322.org and www.dyndns.org.

Also the equipment comes with a globally unique domain name.

User can choose it himself. Generally speaking, users often use .

5.3.5 Upnp

Upnp is to realize automatic port mapping function. If the

camera is connected to a router. In order to access to the

cameras through WAN, it is required to open a specified port of

the router to the camera. (This feature requires router support,

and this feature should be open. Without this feature, you need to

manually set up port mapping in the router). If the upnp enabled

successfully, the below figure will be displayed.

This page is used to set the camera's external ports, the

default value of 80. If you want to visit the multiple cameras in a

same local area network through WAN, in order to distinguish

different cameras, each camera needs a different port, such as

81,82, etc. and so on.

Ｗｈｅｎ　ｕｓｅｒ　ｗａｎｔ　ｔｏ　ｅｎａｂｌｅ　ｔｈｅ　ｍｏｔｉｏｎ　ｄｅｔｅｃｔｉｖｅ，　

holding

down the left mouse button on the image, drugging the mouse,

and the green part is the selected area. when somebody or

something break into the green area ,ip camera will alarm and

trigger according to user’s setting.

６．１　Ｍｏｔｉｏｎ　Ｄｅｔｅｃｔｉｏｎ
Ｍｏｔｉｏｎ　ｄｅｔｅｃｔｉｏｎ：　

Used to open the mobile detection

Ｅ－ｍａｉｌ　ａｌａｒｍ：　

Used to send photos to the specified mailbox

when there is an alarm.

ＦＴＰ　ａｌａｒｍ：　

Used to send photos to FTP specified server.

when there is an alarm.

Installation and Operation Manual

V2.0

６．２　ＳＭＴＰ　Ｓｅｔｔｉｎｇ

When there is an alarm ,you can send e-mail to the specified

mailbox exactly, we set gmail mailbox as an example.

ＨＴＴＰ　ａｌａｒｍ：　

Used to send messages to HTTP site when

there is an alarm.

Ｓｅｎｓｉｔｉｖｉｔｙ：　

For motion detection sensitivity, the smaller the

value is, the higher the sensitivity is. Usually, user use

ｄｅｆａｕｌｔ　

ｖａｌｕｅ

. And also sensitivity can be set by user itself.

Ａｌａｒｍ　Ｄｕｒａｔｉｏｎ：　

Use to sets the duration of Alarm.

Ｓｅｒｖｅｒ：　

Used to set the user's FTP server address.

Ｐｏｒｔ：　

User’s port of FPT server, usually it is default values.

Ｕｓｅｒ：　

User’ name to long in FTP server.

Ｐａｓｓｗｏｒｄ：　

User’ password to long in FTP server.

Ｆｏｌｄｅｒ：

Users upload images to FTP server folder .

ＨＴＴＰ　Ａｌａｒｍ　Ｓｅｔｔｉｎｇ：　

When an alarm is triggered, alarm

information will be send to the user's HTTP site. Set as follows:

Ｓｅｒｖｅｒ：　

Used to set the user's mail address.

Ｐｏｒｔ：　

Used to set the port of mail server ,usually it is default

values.

Ｓｅｎｄｅｒ：

Used to send the user’s mail address.

Ｐａｓｓｗｏｒｄ：　

Used to send the user’s mail password.

Ｒｅｃｅｉｖｅｒ：　

Used to fill in the recipient's email address, when

there is alarm ,it will send photos to this mailbox. My server

requires authentication: To select the default

３．　ＦＴＰ　Ｓｅｔｔｉｎｇ

Installation and Operation Manual

V2.0

7 Control panel

７．１　Ｓｙｓｔｅｍ　Ｉｎｆｏｒｍａｔｉｏｎ：　

Used to display version information

and operating information.

７．２　Ｄｅｖｉｃｅ　ｉｎｆｏｒｍａｔｉｏｎ：　

Used to set the name of the

equipment and the login greeting.

７．３　Ｖｉｄｅｏ　Ｓｔｒｅａｍ：　

For users to view the events of equipment

for fault diagnosis.

７．４　Ｌｏｇ：　

Used to check the information of visitors of camera.

７．５　Ｕｓｅｒ　Ａｃｃｏｕｎｔ：　

Used to increase the landing of the user,

click New, and increase accounts.

７．９　Ｄａｔｅ　ａｎｄ　ｔｉｍｅ：　

system time of the equipment.

７．１０　Ｏｕｔｅｒ　Ｄｅｖｉｃｅ：　

used for monitoring multi-screen at the

same time. Users can also increase the number of network

camera with a monitor screen, so it is convenient to manage.

Click New, enter into the additional options.

Ｕｓｅｒｓ：

the name of the added user

Ｐａｓｓｗｏｒｄ：　

the added password of the user

Ｐｅｒｍｉｓｓｉｏｎｓ：　

new users can be divided into administrators,

operators and guests, administrators have highest authority.

７．６　Ｃｈａｎｇｅ　Ｐａｓｓｗｏｒｄ：　

Used to change the login password.

７．７　Ａｎｏｎｙｍｏｕｓ　Ａｃｃｅｓｓ：　

In some occasions, if you hope

everyone can directly access ip cam ,you can specify a default

identity anonymous users to login.

７．８　Ａｃｔｉｏｎ　Ｓｅｔｔｉｎｇ：

used to configure different users to carry

out operations.

Installation and Operation Manual

V2.0

User input URL, which can be LAN IP address or_ domain

name for WAN.

Also needed to input port number ,user name and password.

７．１１　Ｌｏｃａｌ　Ｓｅｔｔｉｎｇ（ＰＣ）：　

used to set the video and photo

storage path, the user can modify the storage location for their

own need.

７．１２　Ｄｏｗｎｌｏａｄ　Ｏｃｘ２：　

Used for user to download and install

Ocx2 control.

７．１３　Ｌａｎｇｕａｇｅ：

Used to select the appropriate language

version.

８．１　ＰＴＺ　Ｓｅｔｔｉｎｇ：　

used to set the rotation of PTZ, when user

choose reverse rotation, the head will follow the arrows to the

reverse detection, this feature is used to solve the camera when

it is inversion.

８．２　ＰＴＺ　Ｐｒｅｓｅｔ：　　

Use to sets the PTZ speed.

８．３　Ｄｅｖｉｃｅ　Ｓｅｔｔｉｎｇ：

Used for download or upload the

information of equipment configuration, and also parameters can

be recovered to factory Settings.

８．４　ｕｐｄａｔｅ　ｔｈｅ　ｓｏｆｔｗａｒｅ：　

Used to update the software

version

８．５　Ｕｐｄａｔｅ　ｗｅｂｐａｇｅ：　

Used to update the version of the page

８．６　Ｒｂｏｏｔ　Ｄｅｖｉｃｅ：　

Used to restart equipment when it is

needed.

8 Advanced Setting

Installation and Operation Manual

V2.0

9 Diagnose Tool

Diagnostic Tools:Used to check the unusual situation of

equipment, then help users to solve the network connection

problems.

10 Logout

Used to logout and re-login the device.

11 How to Access IP camera via

WAN(Wide Area Network)

Ｔｉｐｓ：

ＤＤＮＳ：　

Dynamic DNS, also called as dynamic domain name,

is used to handle the problem that user’s device doesn’t have

fixed IP while accessing Internet. With assist of DDNS, user can

connect to his/her IP camera directly via DDNS.

If user wants to access his/her IP camera via WAN, two

conditions, mentioned as follows, must be met.

1. User knows the WAN IP address or domain name of the IP

camera.

2. If IP camera connects to a router, the corresponding mirror

port of router must be set for IP camera, so that user can access

the IP Cam located in LAN through WAN.

Most users don’t have fixed IPs. Every time when the device

connects with Internet, networking service operator allocates a

dynamic IP to the device. If the connection breaks and rebuilds, a

new IP will be allocated again. Normally, user doesn’t know the IP

of device. DDNS feature can overcome this problem. As long as

user knows the dynamic domain name, he/she is always able to

access his/her networking device.

For user’s convenience, IP camera supports DDNS feature.

Each IP camera has a unique global domain name, which is

marked on device body. Also, user can obtain the domain name

via IP Cam tools. Please refer the figure attached below.

If user wants to visit domain, he/she just needs to do port

mapping on router (How to do will be explained in the following

pages). Then, user can direct access to the domain name, such

as, http://aa0061.netipcam.com:822 is the port number of device.

The device also supports third-party domain name resolution,

currently supports www.3322.org and www.dyndns.org. If users

need a third party domain solution, he/she can access the

appropriate site and apply for the dynamic domain. Then, fill the

applied domain information in the camera.

Next, we introduce how to do port mapping on router. Two

methods are available.

1. 1.Mapping port automatically via Upnp on router.

2. 2.Establish virtual server via setting router.

Above two methods can be finished on GUI web page of the

router. We recommend No.1 solution.

If user select No.1 solution, he/she should ensure the router

support Upnp protocol, and enable Upnp port mapping feature,

the following introduction takes TP-LINK and the DLINK router as

example to show how to activate upnp port mapping function and

how to establish a virtual server .

Installation and Operation Manual

V2.0

Ｉｆ　ｙｏｕ　ｕｓｅ　Ｄ－ＬＩＮＫ　ｒｏｕｔｅｒｓ，　ｐｌｅａｓｅ　ｒｅｆｅｒ　ｔｏ　ｔｈｉｓ　ｎｏｔｅ．
ｉ）　Ｈｏｗ　ｔｏ　ｓｅｔ　ＵＰＮＰ　ｐｏｒｔ　ｍａｐｐｉｎｇ：
１．　Ｐｕｓｈ　ｔｈｅ　ｂｕｔｔｏｎ　ｏｆ　ＷＰＳ　ｏｎ　Ｄ－Ｌｉｎｋ　ｒｏｕｔｅｒ　ｔｉｌｌ　ｔｈｅｒｅ　ｉｓ　

ｂｌｕｅ　ｌｉｇｈｔ　ｆｌａｓｈ

２．　Ｐｕｓｈ　ｔｈｅ　ｂｕｔｔｏｎ　ｏｆ　ＷＰＳ　ｏｎ　ＩＰ　Ｃａｍｅｒａ　ｔｉｌｌ　ｔｈｅｒｅ　ｉｓ　ｂｌｕｅ　

ｌｉｇｈｔ　ｆｌａｓｈ，　ｔｈｅｎ　ＩＰ　ｃａｍｅｒａ　ｃｏｎｎｅｃｔｓ　ｔｏ　ｔｈｅ　Ｄ－Ｌｉｎｋ　ｒｏｕｔｅｒ．

1. Log in to the device page "forward rule">> "UPnP Settings",

ensure that the current UPnP state is "opened" as shown below

2. Log on to network camera, open the Device page "Network

Settings">> "UPnP Settings", choose to "enable the UPnP

feature" and click "Save". It will cost a few seconds to update the

UPnP success, as shown below

wps

Installation and Operation Manual

V2.0

12 How to Access IP Camera

Through Intelligent Mobile Phone

3. Settings finished

Ｈｏｗ　ｔｏ　ｅｓｔａｂｌｉｓｈ　ｖｉｒｔｕａｌ　ｓｅｒｖｅｒ

1. Open the router GUI page "forward rule">> "virtual server",

as shown below,

Enter the IP address and network camera port, and then

"Save Settings"

3. Settings finished

Ｔｉｐｓ：

In our test, we found that some routers will give higher priority

to the virtual server port mapping. If both the virtual servers and

UPnP port mapped, and two different IP address are conflicted,

the router will connect to the specified virtual server IP address.

This will leads to UPnP mapping not useful, although it is set

successfully.

Not recommended to set both virtual server and UPnP port

mapping in the same.

You can access your IP Camera through WAN after finish

setting up dynamic DNS domain name and port mapping.

With the assistance of professional client software IP Cam

Viewer, you can access any online IP Camera anywhere through

intelligent mobile phone, iPhone or Android-OS(Operation

System) based mobile phone. As follows below, we take iPhone

as example to show how to set IP Cam Viewer.

1. Download IP Cam Viewer software from CD delivered in

package box to your intelligent mobile phone. Now, IP Cam

Viewer have iPhone version and Android-OS version. Please

confirm your mobile phone has iPhone OS or Android-OS and

choose the correct software version.

2. Install IP Cam Viewer.

3. Run IP Cam Viewer, shown below,

Installation and Operation Manual

V2.0

4. Add IP cameras. Click button to setup

configurations.

Click button , you can find the menu below.

Click button to add device,

Installation and Operation Manual

V2.0

Click button OK and go back to main menu shown as follows,

Please input the parameters correctly following the

introduction below,

Option

Ｔｙｐｅ

: choose as device type.

Option

ＩＰ

: input the

ＩＰ　Ａｄｄｒｅｓｓ　ＯＲ　Ｄｏｍａｉｎ　Ｎａｍｅ

of the IP

Camera.

Option

Ｐｏｒｔ

: input the Port Number of the IP camera.

Option

Ｕｓｅｒ

: input the User Name of the IP camera.

Option

Ｐａｓｓ

: input the Password of the IP camera

Installation and Operation Manual

V2.0

You can choose any IP camera displaying in the client

software and run PTZ operations. Click the IP camera channel

and the image will be displayed in full-screen scale.

Click button

to shot photographs and save the pictures

in mobile phone. You can click button

to return main menu

and click button

to display PTZ operation menu, shown as

follows.

You can control the rotation directions of the IP camera

through the direction button, upward, downward, left and right.

Except the four direction buttons, the rest buttons are reserved

for future functions.

Thank you for reading the manual.

This ipcamera have wpa