Kaito KA1102 - User Manual

Full Text Searchable PDF User Manual

INDEX

POWER SOURCES........................................................... 1
OPERATING ON BATTERY............................................... 1
OPERATING ON AC ADAPTOR........................................ 2
POWER INDICATION....................................................... 3
BATTERY CHARGE........................................................... 3
CLOCK FUNCTION..........................................................4
SET THE CLOCK...........................................................4
SELECT TIME MODE......................................................5
MW STEP 9K/10K SELECTION.............................................5
TURN ON / OFF THE UNIT.................................................. 6
POWER ON / OFF........................................................ 6
AUTO TURN ON /OFF ..................................................6
SLEEP......................................................... ...............6
BAND SELECTION.......................................................... .7
METER BAND................................................................. 7
LOCAL / DX SWITCH........................................................7
PAGE FUNCTION............................................................8
TUNING INTO STATIONS................................................... 8
MANUAL TUNING........................................................ 8
AUTO SCAN TUNING.................................................... 9
SPEED CHANGE TUNING............................................ 10
DIRECT FREQUENCY ENTRY......................................... 11
MEMORY SCAN TUNING............................................. 13
PRESET STATIONS...........................................................14
RANDOM PRESET.......................................................14

BAND PRESET.........................................................15
ATS ......................................................................17
COPY FUNCTION.......................................................19
DELETE PRESET STATIONS............................................ 20
RECEIVE SSB & CW.................................................... 21
SET ALARM BY BEEP.................................................... 22
AUTO POWER ON / OFF .......... ................................... 24
SET SLEEP TIME..........................................................26
LOCK FUNCTION.......................................................27
BACK LIGHT FUNCTION
WIDE / NARROW BAND.

...............................................27
.............................................. 28

STEREO / MONO / BASS.............................................. 28
AUTO RESET.............................................................. 28
SIGNAL STRENGTH / FM STEREO....................................29
AUDIO OUTPUT..........................................................29
LISTENING WITH EARPHONES....................................... 30
USING FOLDING STAND.............................................. 30
USING ANTENNA....................................................... 31
CAUTIONS................................................................33
SPECIFICATIONS....................................................... 34

INDEX

1. Slide the battery lid.
2. Insert three AA batteries with
correct polarity as shown in
the compartment.
3. Close the lid of compartment.

OPERATING ON BATTERY

Disconnect external power source before operating on
battery power.

BATTERY REPLACEMENT

1. When the sound becomes weak and distorted, and battery
power indicates , replace batteries immediately,
otherwise will turn to , then the unit will shut off
automatically.
2. All memories (station presets) are permanently stored.
However, when the batteries are removed, the clock reverts
to the default setting of

12:00

and the last beep setting is

cancelled. They need to be reset.

POWER SOURCES

BATTERY INSTALLATION

Do not try to recharge dry batteries.
Do not mix old batteries with new ones.
Remove the batteries if the unit will not be used for a
long period of time.

When the unit is not being used for a long period of time,
remove the batteries to avoid damage from battery leakage
and corrosion.
If battery leakage occurs, wipe the battery compartment
with a soft cloth before inserting new batteries.

OPERATING ON AC ADAPTOR

1. Plug the adaptor into an 220V AC power outlet.

2. Insert the adaptor

s small connector plug into the DC

JACK , appears in the display.

3. Turn on the unit.

·ü

½»

Á÷

µç

²å

×ù

If the AC adaptor is connected, the unit automatically

switches to the AC adaptor power, and installed batteries
are no longer in use.
If the adaptor is connected while the backlight is
illuminated, the illumination will remain on.
Remove the batteries if you want to use AC adaptor for
a long period of time.

Left Side

The battery power is divided into 4 levels.

Full

Medium

Exhausted, auto shut off

Lower

POWER INDICATION

BATTERY CHARGE

When battery power indicates from to , the unit will
shut off automatically.
While the unit is on, if appears in the display when using
rechargeable batteries, batteries need to be charged.

1. Install three AA rechargeable batteries with correct polarity.
2. onnect

the

other side securely to DC Jack .

Plug the adaptor into an 220V AC power outlet, c

3. With the radio turned off, press the CHARGE button , the
power indicator will flash for 4 seconds. Press number
button 1..9 to select charging hours according to battery
capacity in flashing time, otherwise the unit will exit from
charge mode.
4. The charging time indicates in the display. When charging has
been completed, the unit stops charging automatically.

If charge time is not been set, the unit will exit from the charge
mode.
Keep the unit off when charging.
Battery charge will be terminated once the unit turns on.

CLOCK FUNCTION

The unit has two clock modes (12H/24H) for user to select.

The default time of the unit is

12:00.

Set the clock to the current

time.
1. If the unit is turned on, press POWER button to turn it off.
2. Press ENTER button twice, indicator flashes for six
seconds.
3. While is flashing, press number button to set current time.

SET THE CLOCK

ENTER

button 0~9

ENTER

CLOCK FUNCTION

The unit will adjust the current speed automatically during
charging.
Use NiMH batteries, and do not charge them for more than
seven hours.
When using new rechargeable batteries or those which have
not been used for a long time, charge them fully, then use them
until they have completely run down. Repeat this cycle two
more times, then those batteries can be used normally.
Do not leave fully charged batteries unused for a long time.

CHECK CURRENT TIME

1. When the unit is off, current time indicates in the display.
2. When the unit is on, hold down EXIT button about 0.5 second
to display current time 3 seconds.

SELECT TIME MODE

Press button 1 or 2

1. Disconnect the AC adaptor, remove the batteries, till nothing
appears in the display.
2. About 30 seconds later, connect the AC adaptor or insert
batteries:

SET

appears in the display.

3. Quickly press ENTER button twice,

12-24

appears in the

display for 3 seconds.

Please see below

4. Press number button 1 or 2 to select 12H or 24H time mode.

ENTER

To meet your listening requirement in different countries, MW

step can be selected.

North and South America

10KHz

Other Countries

9KHz

MW STEP 9K/10K SELECTION

1. Disconnect the AC adaptor, remove the batteries, till nothing
appears in the display.
2. About 30 seconds later, connect the AC adaptor or insert
batteries,

SET

appears in the display.

ENTER

3. Press ENTER button,

9-10

appears in the display for three

seconds, 9 indicates the medium wave AM channel spacing

is 9KHz

while 10 means it is 10KHz.

4. Press number 1 to select 9K step

press number 2 to select

10K step.

Press button 1 or 2

Press POWER button to turn on the unit manually, the

unit will receive the last channel you ever heard. After

listening, press POWER button again to turn it off.

TURN ON / OFF THE RADIO

If AUTO TURN ON FUNCTION is activated, the unit will
automatically turn on at presetting time.
You can set SLEEP time after setting auto turn on time or
turning on the unit. The unit will automatically turn off when
the set time reaches.

Volume is controlled by

press VOL+ or VOL-

button. Volume indicator

indicates the volume

level.

DIGITAL VOLUME CONTROL

Increase

Decrease

VOL

BAND SELECTION

Press FM button to select FM band; Press MW button

to select MW band. Press SW button to select SW band.

METER BAND

In SW or FM band, set LOCAL/DX switch to a proper

position can increase reception.

In general, set the switch in DX position unless there is a

strong interference or when you are listening to local stations.

LOCAL / DX SWITCH

Press METER BAND button repeatedly to select your
desired meter band.

49M

41M

31M

25M

22M

Meter Band Circulation

19M

16M

FM, MW, SW band can be select by pressing corresponding
band button.

SW/METER

1. Press POWER button to turn on the unit.

2. Select desired band.

3. Set scan method to STEP by press SCAN button till

"STEP" appears in the display.

4. Press SCAN+ or SCAN- button repeatedly to tune into the

desired station.

Manual Tuning

Ê Ö ¶ ¯ Ë Ñ Ë ÷

TUNING INTO A STATION

PAGE

There are total 10 pages for you to store stations. Each page
can store 19 stations. Stations can be random stored on page
1-6. Page 7-9 are assigned to different band. Page 0 is edit page.

Select Page

1. When the unit is on, press PAGE button , page indicator
P will flash for 3 seconds.
2. Press your desired page number while P is flashing.

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

Ê Ö ¶ ¯ Ë Ñ Ë ÷

Auto Scan Tuning

1. Press POWER button to turn on the unit.

2. Select desired band, select page from 1-6.

3. Set scan method to STEP by press SCAN button till

" STEP" appears in the display.

The frequency changes in the channel steps shown
below each time the button is pressed.

Manual scan is suitable for weak signal stations.

Page

Band

Step

0 - 6

10K

MW
SW

50K

9K / 10K

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

4. Hold down SCAN+ or SCAN- button for about 1 second,

release when the frequency changes, the unit starts to tune

into the stations automatically. When a station is tuned in,

scanning stops and the tuned station is heard. Repeat

above to go on scan.

Auto scan tuning on page 1-6 the frequency step is 100K
for FM, 9K/10K for MW

and 5K for SW.

Page 7

9 do not support auto scan tuning.

If the scanned station is not you want, repeat above

operation to skip the station and scan again.

Press any button will stop scan tuning.

Scan tuning is more suitable for strong signal broadcasting,

it may not stop if broadcast signals are weak.

If tuning become slowly in a frequency range, try manual

tuning to see if there are some weak stations.

SPEED CHANGE TUNING

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

Speed change tuning only can be used on page 9.
Speed change tuning not only will increase the scan speed,
but also will not miss the weak stations.

1. Press POWER button to turn on the unit.
2. Turn to Page 9.
3. till

appears in the display.

4. Hold down SCAN+ or SCAN- button, frequency changes in
the step of 1K, the scan speed is changed from slow to fast,
when a strong signal is searched, signal strength indicator
appears, the scan speed decrease, then the speed will increase
again to continue auto scan.

Direct Frequency Entry

Direct frequency entry makes it extremely easy to tune

into a station that you knows its exact frequency.

1. Press POWER button to turn on the unit.

2. Select the desired band.

Press ENTER button , the frequency disappears

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

Example 2: To enter SW6.255MHz

Example 1: To enter FM89.80MKz,

You must go to next step in 6 seconds, otherwise the

unit will exit direct entry mode.

If the last frequency number is 0, you can press ENTER

button to supersede input 0.

ENTER

If a wrong number is entered, press EXIT button to clear it.

If an invalid frequency is entered,

ERR

will flash in the

display.

Press EXIT button can exit from frequency entry immediately.

Before manual scan or auto scan, you can use quickly input

function to quickly go to a frequency range.

Example: The frequency range of FM is 70.00-108.00MHz,

if you enter 100MHz, you can :

1. Select FM band.

2. Press ENTER button.

3. Press number 1, then press ENTER button,

100.00MHz will display.

Quickly Input

from the display for 6 seconds.

4. Press the number button with complete frequency,

the unit will tune into the entered frequency.

¼ Ç Ò ä µ ç Ì ¨

1. Set the scan method to MEM by press till

MEM

appears in the display.

2. Press SCAN+ or SCAN- repeatedly to display the desired

preset number.

Memory Scan Tuning

If you remember the preset page and preset number clearly,

you can press them directly to tune into the station.

After the highest preset number has been scanned, the

unit will return to the smallest preset number and scan

again.

The unit will circulated scan between page 1-6.

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

There are total 10 pages (Page 0-9) for you to preset stations.

Up to 19 stations can be preset on each page. All preset stations

are permanent store. Each page is assigned as:

Page 1 to 6 : Random preset, no band limited

Page 7 : For FM band only.

Page 8: For MW band only.

Page 9: For SW band only.

Page 0: For ATS function, random preset.

Random Preset (On Page 1-6)

PRESET STATIONS

1. Turn on the unit.

2. Tune into a desired station by manual tuning, scan tuning or

direct entry.

3. Press Page button , page indicator P will flash for 3

seconds, page number disappears for you to enter.

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

4. Press the desired number from 1-6 while P is flashing.

5. Press M/LOCK button , M flashes for 5 seconds.

6. Press a preset number from 1-19 to memorize the station. The

corresponding number constant indicates in the display.

If a station is already stored, the new frequency with same

preset number replaces the old one.

Example 1

input 10

Double-digit Number Input

When you want to input a double digit number, press number
0 first, 1- appears in the display, then press the last number.

Example 2

input 15

Band Preset (On Page 7-9)

Page 7

9 is assigned to different band. Page 7 is assigned

to FM stations

page 8 for MW stations, and page 9 for SW

stations.

1. Turn on the unit.

2. Press Page button , page indicator P flashes 3 seconds,

page number disappears for you to enter.

3. Press corresponding page number of each band.

4. Tune into a desired station by manual tuning, scan tuning or

direct entry.

6. Press M/LOCK button , indicator M flashes for 5 seconds,

the preset number disappears for you to enter.

7. Press a preset number from 1-19 to memorize the station. The

indicator M constantly display.

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

ATS

ATS Preset

1. Turn on the unit.
2. Press page button , then press number 0 goes to page 0.
3. Select desired band.
4. Press SCAN button till STEP

If you don't want to start scan from current frequency, press

Enter button to input start frequency.

Check if there is already a preset number, press SCAN+ or

SCAN- button to clear it, the scanned stations will be stored
from no. 1, otherwise, the scanned stations will be preset after
that number.
7. Hold down SCAN+ or SCAN- button for 1 second, ATS function
runs. The unit begins to scan in ascending or descending order
from current frequency. When tuning into a station, It will store
on page 0 automatically. When 19 memories are full or scan
back to beginning frequency, scan stops.

( On Page O)

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

6.\7.

Repeat ATS

After a ATS operation, if the preset number is not full or some
scanned stations are unnecessary, you can delete some stations,
and repeat ATS operation.
1. Set the scan method to MEMO by press SCAN button till
MEM
2. Delete the unnecessary stations by memory scan. After deleting,
the unit will adjust the preset number automatically.
3. Press SCAN+/- to find the highest preset number.
4. Set the scan method to STEP by press SCAN button till STEP
appears in the display.
5. Hold down SCAN+ or SCAN- to repeat ATS operation, till all
stored stations are satisfied to you.

COPY FUNCTION

All stored stations on Page 0 can be copied to other page. If
copy to page 7-9, please note the band must be constant.

1. Turn to Page 0, make sure there are stations stored.
2. Press button P , P will flash 3 seconds, page number

disappears.

3. While P is flashing, press number 0, 0 will flash for 3 seconds.
4. While 0 is flashing, press the page number you want to copy
to.
5. Copy succeed.

New stations copied from Page 0 will cover the old ones
which preset on that page before.

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

Delete Single Station

1. Turn on the unit.
2. Set the scan method to MEM by press SCAN button
till

MEM

appears in the display.

3. Press SCAN+ / - to select unnecessary stations.
4. Press DEL button ,

DEL

appears in the display,

and preset number flashes for 3 seconds.
5. Press DEL button again while the preset number is
flashing, the stored station is deleted.

DELET STATIONS

Delete Whole Page

1. Turn on the unit.
2. Press P button and page number you want to delete.
3. Hold down DEL button for 1 second,

DEL

appears

in the display, and page number flashes for 3 seconds.
4. Press DEL button again while page number is flashing,
all the stations on this page will be delete.

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

4./5.

On page 0, the preset number order will be adjusted
automatically when a preset station is deleted.
If a preset station on page1~9 is deleted, the deleted preset
number is blank. It can be used on next preset.

RECEIVING SSB & CW

1. Turn on the unit.
2. Press P button , P flashes for 3 seconds.
3. Press number 9 goes to page 9 while P is flashing.
4. Press W/N button , set it to N.
5. Press SSB button , SSB appears in the display.
6. Press SCAN button , set the scan method to STEP.

8. Tune the SSB FINE Knob slowly to have the best reception.

7. Press SCAN+ or SCAN- button to search for SSB signal.

DE1102

DEL

CHARGE

SCAN

AM:

W/N

POWER

VOL

STRENGTH

FM ST

FM:

ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

Set Beep Time

SET ALARM BY BEEP

When alarm indicator constantly displays, alarm function runs.
The unit will beep when the preset time reaches.

1. With the unit turned off, press ENTER button thrice, the

last setting time appears in the display. ( If the beep time

has not been set before, --:-- appears

, will flash for 6

seconds.

2. Press number button to enter the desired beep time

while is flashing.

3. After setting, constantly appears in the display, the

unit returns to clock mode.

4. When the setting time reaches, the beeper will keep on

beep for 60 seconds unless you press any button to stop

it.

DE1102

DEL

CHARGE

SCAN

AM:

W/N

POWER

VOL

STRENGTH

FM ST

FM:

ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

You have to go to the next step in 6 seconds, or the unit

will exit from the beep setting and return to clock mode.

The beep volume is not controlled by digit volume button.

If the preset time is not changed or cancelled, the beeper

beeps at the preset time everyday.

If power is too weak, beep function does not work.

The beep sound will cover the broadcast if the unit is on

at beep time.

If beep and auto turn on time is set as the same, the unit

will turn on after beep.

If the power source is disconnected, the preset beep time

will be cancelled.

If the earphone is connect with the unit, the beep function

does not work.

Cancel Beep Setting

In power off mode, press ENTER button thrice, flashes,

press EXIT button while is flashing, beep setting is

cancelled with disappears, the unit returns to clock mode.

Check Beep Time

When the unit is off, hold down EXIT button about 0.5s,

flashes and the last preset beeptime displays, 3 seconds

later, the unit returns to clock mode.

Set Auto Turn On Time

Total three groups of different auto turn on / off time can be set in
24 hours. The band, frequency and volume are also can be set.

AUTO TURN ON / OFF THE UNIT

1. With the unit turned off, press ENTER button ,

SET

displays for 2 seconds.
2. A. Press first setting button , indicator flashes, and the last
preset time appears.
B. Press second setting button , indicator flashes, and
the last preset time appears.
C. Press the third setting button , indicator flashes, and
the last preset time appears.
Press number button to input the desired auto turn on time,
then the unit goes into frequency preset.

DE1102

DEL

CHARGE

SCAN

AM:

W/N

POWER

VOL

STRENGTH

FM ST

FM:

ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

1./5.

Check Auto Turn On Time

With the unit turned off, press ( or ) button, the preset
time is displayed for 3 seconds.

Cancel Auto Turn On Time

With the unit turned off, press ( or ) , ( or ) flashes,
while it is flashing, press EXIT button, ( or ) is cleared
from the display, the setting has been cancelled.

3. Press number button to input the desired frequency. Press
ENTER button to confirm the last preset frequency.), Then
the unit goes into volume control mode.
4. Press VOLUME + or - button to adjust the desired volume.
5. Press ENTER button, the unit enters to sleep time setting and
is flashing. Press desired sleep time directly from 1 to 99
minutes.
6. After above setting, the auto turn on indicator constantly displays,
the unit will turn on at the preset time, frequency and volume, it
will turn off when preset sleep time reaches.

The cancelled auto turn on time can be resumed by press
( or ) and ENTER button.

1. Press POWER button to turn on the unit.
a. Set sleep time: while the unit is on, default sleep time 99
and flashes for 2 seconds.
b. Reset the sleep time: after turn on the unit, hold down EXIT
button for 0.5 second, clock indicator flashes, while it is
flashing, press enter button to go into sleep set mode.
flashes.
2. While is flashing,
a. Press EXIT button will cancel the sleep function,
disappears.
b. Press ENTER button,   appears.
3. Quickly press number button to set the desired sleep time
from 1 to 99 minutes
For example: if your desired sleep time is 60 minutes, direct
press number button 6 & 0, the unit will shut off 60 minutes
later.

4. If there isn't any operation in 2 seconds, indicator constantly
appears, the unit will turn off 99 minutes (default time) later.

When sleep time setting is over, constantly displays.
The rest sleep time indicates in FM or MW band.
If there is no further action to next step in 6 seconds, the
unit will exit the sleep time setting, and default 99 minutes
as sleep time.

SET SLEEP TIME

MHz

97 1

VOL

MEM

8 7

POWER

MHz

97 1

VOL

MEM

8 7

LOCK FUNCTION

The lock function can be used to avoid any accidental

operation when the unit is being carried or used.

Hold down LOCK button for 2 seconds till appears in

the display, lock function is activated, all buttons except

LOCK button become inoperative.

Hold down LOCK button for 1 second to cancel lock function.

disappears from the display.

LOCK

BACKLIGHT FUNCTION

There are 3 kinds of back light mode to select: normal,

always-on and backlight off.

1. Normally, press any button in dark place will start up the

backlight of the display and buttons. The backlight will

turn off automatically if no further operation in 8 seconds.

2. When the backlight is illuminated, connect the AC adaptor

will remain the illumination. Disconnect the AC adaptor, the

backlight will off and return to normal mode.

3. With the unit turned off, if you hold down the backlight

button for 0.5 second, the backlight will off. Hold down

again to resume.

Backlight consumes little battery power.

AUTO RESET

If the unit operates erratically, just remove the batteries or

disconnect the AC adaptor for about 30 seconds, then

insert the batteries or connect the AC adaptor, the unit will

resume to normal operation.

Reset function will not erase all of the memories except

the clock time and beep setting.

WIDE / NARROW BAND

Press AM: W/N button repeatedly to select wide band or
narrow band when listening MW or SW broadcasting.

Wide band has a better tone reception than narrow band, but
it is noisier than narrow band reception.

STEREO / MONO / BASS

Stereo/ Mono: stereo is suitable for strong signal music
broadcast, mono is suitable for weak signal
and voice program.
News / Music: push the switch to corresponding position
when listen news or music.
Bass: it is more suitable for strong signal stereo music
broadcast. If you listening radio with speaker,
keep the BASS function off.

AUDIO OUTPUT

SIGNAL STRENGTH / FM STEREO

DEGEN

DE511

REC

DIGITAL VOICE

RECORDER

PLAY/PAUSE DELETE/STOP

FORWARD

BACKWARD

MODE

FOL

SET TIME

REP

Line out jack

The unit has signal strength and
FM stereo indicator.
In MW and SW band, light 1.2.3.
4 on or off to indicate received
signal strength.
In FM band, light 1.2.3 indicates
signal strength, light 4 indicates
FM stereo.

You can output the radio broadcasting by connecting the unit to
external appliance with a connecting cable inserted into LINE
OUT jack.
Adjusting the VOLUME+ or - on the radio, and news/music
selection will effect the audio output.

DE1102

ENTER

EXIT

DEL

CHARGE

LOCK

SCAN

AM:W/N

METER

POWER

VOL

STRENGTH

FM ST

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

FM:ST/MON

BASS

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

DE1102

ENTER

EXIT

DEL

CHARGE

LOCK

SCAN

AM:

W/N

METER

POWER

VOL

STRENGTH

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

FM:

ST/MON

BASS

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

Pull out the folding stand in rear panel,

extending the telescopic antenna straight

upward.

When listening to stereo reception, normally use
earphone and set MONO/STEREO button
to STEREO.

Speaker has MONO effect only.

LISTENING WITH EARPHONES

Avoid using earphones at high volume, if you experience
a ringing in your ears, reduce volume or stop using it.
Shut down the radio before sleeping.
Do not use earphones while driving or cycling, it can also
be potentially dangerous to play your earphones at high
volume while walking, especially at pedestrian crossing.

Notes On Earphones

USING FOLDING STAND

LIN

MW Reception

Ferrite antenna inside the unit functions as MW antenna, it is

strongly effected by the reception direction.

When listening to MW broadcast, rotate the unit to find the

position which gives the best reception.

FM Reception

Telescopic antenna functions as FM

antenna, keep it extended and change

its length and direction to find the

position which gives the best reception.

USING ANTENNA

SW Reception

Telescopic antenna functions as

SW antenna. Extending the

antenna straight upward to get

the best reception.

External Antenna

If FM or SW reception is too weak,

switch Local / DX to DX, then

use a external antenna to improve

reception.

Do not use external
antenna during a thunder
storm.

(SW)

Outdoors

DE1102

DEL

CHARGE

SCAN

AM:W/N

POWER

VOL

STRENGTH

FM ST

FM:ST/MONO

PLL FM STEREO/MW.SW DUAL CONVERSION
SYNTHESIZED WORLD RECEIVER

190

Ö Ç

Ä Ü

³ ä

µ ç

³ ¬Ö Øµ ÍÒ ô

Ð Å
º Å
Ç ¿
¶ È
Ö ¸
Ê ¾

ENTER

EXIT

M/LOCK

FM/BASS

SW/METER

SSB/190MEMORY/ATS

CAUTIONS

Avoid exposure to temperature extremes, direct sunlight,

moisture, sand, dust or mechanical shock.

Should anything go wrong with the radio, please remove

the batteries and have the unit checked by qualified

personnel before operating it any further.

Use only power sources specified in this manual.

When the unit is not being used for a long period of time,

remove the batteries to avoid damage from battery

leakage and corrosion.

The LCD display may become hard to see or slow down

when using the unit at high temperatures (above 40 C)

or at low temperatures (below 0 C). At room temperature,

the display will return to its normal operating condition.

SPECIFICATIONS

FM 70.00 - 108.00 MHz

MW 520 - 1710 KHz

SW 3.000 - 29.995 MHz

2. Memory Stations (190)
Random preset on page 1~6

band preset on page 7

ATS preset on page 0

90m 3.160 - 3.455 MHz

75m 3.860 - 4.055 MHz

60m 4.710 - 5.105 MHz

49m 5.910 - 6.255 MHz

41m 7.010 - 7.405 MHz

31m 9.170 - 9.995 MHz

25m 11.510 - 12.155 MHz

22m 13.510 - 13.905 MHz

19m 15.010 - 15.705 MHz

16m 17.260 - 18.105 MHz

13m 21.410 - 21.955 MHz

11m 25.610 - 26.100 MHz

1. Frequency Range

8. Dimensions: Approx. 143 X 88 X 28.5mm
9. Mass: Approx. 280g (excl. Battery)

6. Speaker: D66mm
7. External Earphone: D3.5mm

5. Power Supply:
Battery: 3 AA batteries
External power: DC in 6V 300mA
Recharing Time: 1-9 Hours

3. Noise Limit Sensitivity
FM 10 V
MW 1mv/m
SW 20 V

4. SW Selection Wide band 20dB Narrow band 80dB