Full Text Searchable PDF User Manual
RC
66
Radio Receiver
focus on productivity
Radio transmission
for touch probes
Installation instructions
English
Type
P03.6600-010
Content
by Blum-Novotest 2010
3
1. Safety Rules
................................................................................... 4
2. System Overview
.......................................................................... 4
2.1
Description
....................................................................................................... 4
2.2
Display Elements
............................................................................................. 6
2.3
Technical Data
................................................................................................ 6
2.4
Area of Work
................................................................................................... 7
2.5
Complete System
........................................................................................... 7
3. Mechanical Installation
............................................................... 8
3.1
Mounting Variants
........................................................................................... 9
4. Electrical Connection
................................................................ 12
5. Maintenance
.............................................................................. 12
6. Order Numbers
........................................................................... 12
7. Radio Approval
.......................................................................... 13
Installation instructions interface
IF
59-A2
(P03.5900-000.011)
Keys:
CAUTION
Important advice for appliance protection
Advice to secondary literature
Additional advice
Tip
LED shines
LED flashes
Green
Red
Blue
Orange
Violet
Abbreviations:
M
d
Tightening Torque
P03.6600-000.011
306600011_EN.docx
02.05.2011 version: V1A
Original operating instructions
Subject to technical change without any
notice
GN
GN
GN
VT
OG
BU
RD
Safety Rules
4
by Blum-Novotest 2010
1.
Safety Rules
CAUTION
Risk of short-circuit
Please separate connecting cable resp. plug connection off
circuit only.
2.
System Overview
2.1
Description
The radio receiver is compatible with the BLUM measuring devices
TC
series
(radio probes TC60, TC63-30). The receiver enables wireless communication
between the measuring devices and the NC control. Data transfer to the NC
control via IF59-A2 interface.
Fig. 2.1
(1a) LED mode
(2)
cable
(1b) LED battery
(3)
for mounting screws
(1c) LED status
(4)
seal insert + O-Ring
(1d) LED receive
(at horizontal cable outgoing)
(1e) LED transmit
90
°
M
o
d
e
RC66
IF59-A2
P03.5900-010-A2
3
4
1a
1b
1c
1d
1e
2
System Overview
by Blum-Novotest 2010
5
Fig. 2.2
M
o
d
e
m
a
x
.Ø
3
8
m
in
.
Ø
2
0
30
42
Ø
4
4
9,5
Ø
3
,3
Ø
6
3,2
M
4
37
3
7
4
5
Ø 6,3
System Overview
6
by Blum-Novotest 2010
2.2
Display Elements
LED
LED colour function
MODE (1a)
Standby
Mode TC1
…
TC6
Pairing procedure
Battery (1b)
Battery o.k.
Battery low
Status (1c)
Initial position
Probe deflected
Receive (1d)
off
No reception
Reception o.k.
Transmit (1e)
Send command
Tab. 2.1
2.3
Technical Data
Protection class
IP68
Power supply
12 V DC / 100 mA via IF59-A2
Weight
600 g
Signal transmisson
Radio transmission
Frequency band:
2,400 – 2,4835 GHz
Transmission power
0 dBm
Transmitter / receiver range
15 m, see chap. 2.4
Minimum bending radius
60 mm (application: flexible)
Max. cable length
50 m
Storage temperature
-20 °C ... +70 °C
Operating temperature
+5 °C ... +50 °C
Tab. 2.2
M
o
d
e
M
o
d
e
BU
RD
GN
GN
RD
OG
BU
VT
GN
GN
System Overview
by Blum-Novotest 2010
7
2.4
Area of Work
TC60 Area of work:
RC66 Transmitter / receiver range:
Fig. 2.3
2.5
Complete System
Fig. 2.4
⇒
Switch ON/OFF via radio signal
⇒
Signal transmission for
TC
series
0°
0°
15°
30°
45°
60°
75°
15°
30°
45°
60°
75°
90°
16
14
12
10
6
15°
30°
45°
60°
75°
15°
30°
45°
60°
75°
90°
8
2
4
0°
15°
30°
45°
60°
75°
90°
16
14
12
10
15°
30°
45°
60°
75°
90°
8
2
4
6
RC66
TC60
IF59 - A2
Z-Nano
A
u
x
TC63-30
Mechanical Installation
8
by Blum-Novotest 2010
3.
Mechanical Installation
CAUTION
Risk of short-circuit
Damage by chips
Never install cables and hoses without protection.
Cables and hoses must always be protected against chips
(protective hose, protection spring, cover etc.).
CAUTION
Risk of short-circuit
Damage of the cable by sharp edges
Pls. deburr the sharp edges on the cable bushing and
mount edge protection!
CAUTION
•
The system should be placed protected from coolant
and chips.
•
Distance between probe and receiver:
Pay attention to chap. 2.4
•
Keep distance to other radio systems
Mechanical Installation
by Blum-Novotest 2010
9
3.1
Mounting Variants
Cable outgoing horizontal:
Pollution of the system
Mount gasket (9a) and O-ring (9b)
Fig. 3.1
Cable outgoing vertical:
Fig. 3.2
4a
4b
Mechanical Installation
10
by Blum-Novotest 2010
Variant 1 Variant 2 Variant 3 (option)
Fig. 3.3
(4a)
seal insert
(4b)
O-Ring
(5)
universal holder (option)
Tightening torque:
DIN912 M3x10: M
d
= 1,3 Nm (max.)
DIN912 M4x10: M
d
= 3,0 Nm (max.)
DIN912 M6x12: M
d
= 10,5 Nm (max.)
Drilling template (scope of delivery)
M3
M4
M6
4a
P03.5600-010.254
5
4b
P03.5600-010.080
Mechanical Installation
by Blum-Novotest 2010
11
Variant 3
Option Universal Holder
Fig. 3.4
Variant 4:
Option Front-Kit
Pls. refer to the appropriate data sheet
16
22
M6
Ø5,2
Klemmschraube
clamping screw
DIN913 M4 (2x)
M
d
= 1,5 Nm
Schwenkbereich
swivel range
8,5
2
7
1
9
6
0
°
P03.5600-010.080
P03.6600-010.250
Electrical Connection
12
by Blum-Novotest 2010
4.
Electrical Connection
See installation instructions IF59-A2
5.
Maintenance
The receiver needs minimum maintenance only.
Keep the receiver clean and free from chips.
6.
Order Numbers
Radio receiver RC66
- Cable length
L = 10 m PUR
L = 20 m PUR
(8 wires)
P03.6600-010-A2-10
P03.6600-010-A2-20
Front-kit
P03.6600-010.250
Universal holder
P03.5600-010.080
Heavy Duty Kit
Protection spring 1m incl. screwing
P03.5600-010.254
Interface IF59-A2
P03.5900-010-A2
Radio Approval
by Blum-Novotest 2010
13
7.
Radio Approval
Area:
Radio Approval:
Regulations:
Europe:
0681
EN 300 328 V1.4.1,
EN 301 489-17 V1.2.1,
EN 60950-1:2001
Japan:
R 202WW10568412
“This device has been granted a designation number by Ministry of
Internal Affairs and Communications under „Ordinance concerning
Technical Regulations Conformity Certification etc. of Specified Radio
Equipment (
特定無線設備の技術基準適合証明等に関する規則
)“ Article
2-1-19.
USA:
FCC ID: ZCQRCA
FCC Part 15
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Canada:
IC:9570A-RCA
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device
must accept any interference, including interference that may cause
undesired operation of the device.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies with IC Canada RF radiation exposure limits
set forth for an uncontrolled environment as per RSS-102 Issue 4.
14
by Blum-Novotest 2010
EC Declaration of Incorporation
acc. to the EC Machine Regulations 2006/42/EC in the edition from 17 May.2006
We hereby confirm that the subsequently following components are defined for the
installation into other machines and that they are in accordance with the following
safety requirements of the EC regulations.
Commissioning is not allowed until it is ascertained that the machines, in which the
components are installed, are in accordance with the EC regulations 2006/42/EC.
The relevant technical information is compiled acc. to annex VII part B and, where
appropriate, we will send the information concerning the components to the different
countries. The industrial property rights of Blum-Novotest GmbH will remain unaffected.
Component name:
P03.6600
Radio receiver
Safety requirements
2006/42/EG, Annex I
1.5.1
Applied standards:
EC-Regulations:
2004/108/EG
2006/95/EG
1999/5/EG
Applied harmonized standards:
EN61000-6
EN60204-1
EN ISO 12100
EN 300 328
EN 301 489-17
EN 60950-1:2001
Applied national standards:
DIN VDE 0100
DIN VDE 0113
Authorised presentative for technical information:
Blum-Novotest GmbH
Kaufstr. 14
88287 Gruenkraut, Germany
by Blum-Novotest 2010
15
Service Order
Please fill out completely this repair order and attach it to the system. This will
save you and us costs due to time-consuming inquiries and ensures a quick
repair.
Blum-Novotest GmbH
Kaufstr. 14, 88287 Gruenkraut/Gullen - Germany
Tel. +49 751 6008-0, Fax. +49 751 6008-156
Company:
Department:
Contact:
Address:
Phone:
Fax:
Email:
Probe Type, Serial No.:
Machine Type,
Manufacturer:
Description of Defect:
focus on productivity
focus on productivity
Blum-Novotest GmbH
Kaufstr. 14
88287 Gruenkraut, Germany
Tel.:+49 751 6008-0
Fax:+49 751 6008-156
www.blum-novotest.com
vk@blum-novotest.com
Hotline:
Vertrieb/sales:
Tel.:+49 751 6008-200
Service LaserControl :
Tel.:+49 751 6008-202
Service Messtaster/probes: Tel.:+49 751 6008-203
Blum-Novotest GmbH Prüftechnik
KK Blum Laser Measuring Technology
Willich, Germany
Nagoya, Japan
Tel. +49 2154 921970
Tel. +81 568 74-5311
Blum-Novotest Srl
Blum-Novotest
Como, Italy
Shanghai, China
Tel. +39 031 283 955
Tel. +86 21 52080480
Blum-Novotest Ltd.
Blum Production Metrology Co., Ltd.
Birmingham, England
Taichung, Taiwan
Tel. +44 1543 257111
Tel. +886 4 2358 3900
Blum Laser Measuring Technology Inc.
Blum Production Metrology Pte. Ltd.
Cincinnati, USA
Singapore, Singapore
Tel. +1 859 3446789
Tel. +65 62720998
Blum-Novotest Sarl
Blum-Novotest Ltd.
Bordeaux, France
Soul, Republic of Korea
Tel. +33 55702 0135
Tel. +82 2 2026-1300
Blum-Novotest s.r.o.
Kroměříž, Czech Republic
Tel. +420 573 330373
Support