PDF User Manual

  1. Home
  2. Manuals
  3. Aukey SW-B1 User Manual

Aukey SW-B1 User Manual

Made by: Aukey
Type: User Manual
Category: Heart Rate Monitor
Pages: 6
Size: 0.28 MB


Download PDF User Manual

Full Text Searchable PDF User Manual

background image

User Manual 

Product name: Silicone intelligent 

Model: SW-B1 

Hi. Thank you for purchasing the SW-B1 Active Wristband. Please read this user manual carefully 
and keep it in a safe place for future reference. If you need any assistance, please contact our 
support team with your product model number and Amazon order number. 
Package Contents 
• Silicone intelligent 
• Instruction Manual 
• 24 Month Warranty Card 
Product Diagram 





background image



App QR Code 




Bring the Silicone intelligent within 3ft (1m) of your device 



In App, access the Settings function in the right corner. 



background image



Go into My Watch function to pair the Silicone intelligent and your device. 

Note: 1. please connect the Silicone intelligent with your device through the App at the first step. 

2. Silicone intelligent will automatically connect to the device it last paired with. 
3. Maximum operating range for the Silicone intelligent is 33ft (10m). If you move out of 

range, the wristband will lose connection. You will need to move back to within range and 
reconnect to your device. 

If you want to reconnect the Silicone intelligent to other devices, please get into the My Watch 
function to forget the current connection. 
For IOS system, you need to completely forget the connection from your device. 
Multi-function & Indicated Light Instruction 



background image




APP Instruction 

Activity reminds if you stay still during the time interval, the Silicone intelligent will vibrate to 
remind you to move. 
Disconnect remind 
Turn it on to remind you to bring the device with you when the wristband is disconnected to your 
Notification reminder 
The wristband vibrates if set the notification on. 


background image

Record your sleep condition.    During the sleep mode, steps won’t be recorded. 
There are three clocks can be set. Even you shut down the device which is connected to the 
wristband, the clocks are still effective. 
Remote Camera   
You can snap the picture though the multi-function button. 
Search camera 
The wristband vibrates if use the search camera function. 
Record your daily steps and sleep condition. 
Adjust the brightness of the Silicone intelligent   
Make your own personalized signature. It is shown on the wristband when you press the 
Multi-function button for 5 times. 
Shutdown watch 
To shut down the Silicone intelligent 
Target steps 
Make the daily target steps. 
More Functions: 
Track device 
The wristband can locate your device when it is connected to your device and the APP has been 
opened in your device. Press the Multi-function button for four times, then long press the 
Multi-function button for 5 seconds when the monitor displays the word FIND. The device will 
ring after the long press. 
More charging Options 
  USB connector built into band to easily charge via any USB power source 
Check the battery level 
Press the Multi-function button once, and then long press the button for 5 seconds when the 
monitor displays time and date. The battery level will be shown after the press. 


background image

• Do not repair, disassemble, or modify under any circumstances. 
• Do not place near any heat source or in direct sunlight 
• Do not swim with the Silicone intelligent 

FCC Statement 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. 

Any Changes or modifications not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment. 


Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or television reception, 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 


FCC RF Radiation Exposure Statement 

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.